Задача настроить связь между двумя этими железками. SRP527W не имеет постоянного IP, по этому IPSec сразу отпадает.
Пробовал настроить GRE
Скрин с SRP527W где настроить IP для туннельного интерфейса я не обнаружил, соответствующих гайдов в интернете тоже.
Конфиг с 800
[more]Current configuration : 4264 bytes
!
! Last configuration change at 05:20:53 UTC Mon Jun 17 2013 by admin
! NVRAM config last updated at 05:20:46 UTC Mon Jun 17 2013 by admin
!
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ****
!
boot-start-marker
boot-end-marker
!
enable secret 5 $1$QI0.$SgyXd3mjnZLbx4WYzsdvr.
enable password 7 *****************
!
aaa new-model
!
!
aaa authentication login default local
!
!
!
!
!
aaa session-id common
!
!
!
memory-size iomem 10
!
!
ip source-route
!
!
!
ip dhcp pool vpn
network 10.26.19.160 255.255.255.224
default-router 10.26.19.161
dns-server 10.26.71.3
!
!
ip cef
ip domain name zapgaz.net
no ipv6 cef
!
!
multilink bundle-name authenticated
vpdn enable
!
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
l2tp tunnel timeout no-session 15
ip pmtu
ip mtu adjust
!
license udi pid CISCO881-SEC-K9 sn FCZ1620C757
!
!
!
!
ip ssh authentication-retries 2
ip ssh version 2
!
!
!
!
!
sho int tunnel (800)
читать дальше »
Tunnel10 is up, line protocol is up
Hardware is Tunnel
Internet address is 192.168.2.1/29
MTU 17912 bytes, BW 100 Kbit/sec, DLY 50000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation TUNNEL, loopback not set
Keepalive not set
Tunnel source 82.207.88.64 (Dialer0), destination 82.207.88.220
Tunnel Subblocks:
src-track:
Tunnel10 source tracking subblock associated with Dialer0
Set of tunnels with source Dialer0, 1 member (includes iterators), on interface <OK>
Tunnel protocol/transport GRE/IP
Key 0x119EACBC, sequencing disabled
Checksumming of packets disabled
Tunnel TTL 255, Fast tunneling enabled
Tunnel transport MTU 1464 bytes
Tunnel transmit bandwidth 8000 (kbps)
Tunnel receive bandwidth 8000 (kbps)
Last input 00:42:07, output 00:41:57, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/0 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
10 packets output, 1260 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 output buffer failures, 0 output buffers swapped out
