[rawsik]

ls -la /usr/local/etc/rc.d/
что либо находит ?
раньше стояла другая версия ?

cat samba

Код:

#!/bin/sh
#
# $FreeBSD: ports/net/samba3/files/samba.in,v 1.6 2007/06/05 10:55:06 tdb Exp $
#

# PROVIDE: nmbd smbd
# REQUIRE: NETWORKING SERVERS DAEMON ldconfig resolv
# BEFORE: LOGIN
# KEYWORD: shutdown
#
# Add the following lines to /etc/rc.conf.local or /etc/rc.conf
# to enable this service:
#
#samba_enable="YES"
# or, for fine grain control:
#nmbd_enable="YES"
#smbd_enable="YES"
#
# Configuration file can be set with:
#samba_config="/usr/local/etc/smb.conf"
#

. /etc/rc.subr

name="samba"
rcvar=$(set_rcvar)

load_rc_config "${name}"
# Custom commands
extra_commands="reload status"
start_precmd="samba_start_precmd"
start_cmd="samba_cmd"
stop_cmd="samba_cmd"
status_cmd="samba_cmd"
restart_precmd="samba_checkconfig"
reload_precmd="samba_checkconfig"
reload_cmd="samba_reload_cmd"
rcvar_cmd="samba_rcvar_cmd"
# Defaults
samba_enable="${samba_enable:=NO}"
samba_config_default="/usr/local/etc/smb.conf"
samba_config="${samba_config=${samba_config_default}}"
command_args="${samba_config:+-s "${samba_config}"}"                    #"
samba_daemons="nmbd smbd"
testparm_command="/usr/local/bin/testparm"
smbcontrol_command="/usr/local/bin/smbcontrol"
# Fetch parameters from configuration file
samba_parm="${testparm_command} -s -v --parameter-name"
samba_lockdir=$(${samba_parm} 'lock directory' ${samba_config:+"${samba_config}"} 2>/dev/null)
# Setup dependent variables
if [ -n "${rcvar}" ] && checkyesno "${rcvar}"; then
    nmbd_enable="${nmbd_enable=YES}"
    smbd_enable="${smbd_enable=YES}"
fi
# Hack to work around name change of pid file with non-default config
pid_extra=
if [ -n "${samba_config}" -a "${samba_config}" != "${samba_config_default}" ]; then
    pid_extra="-$(basename "${samba_config}")"
fi
# Hack to enable check of dependent variables
eval real_${rcvar}="\${${rcvar}:=NO}"   ${rcvar}="YES"
# Defaults for dependent variables
nmbd_enable="${nmbd_enable:=NO}"
nmbd_flags="${nmbd_flags=\"-D\"}"
smbd_enable="${smbd_enable:=NO}"
smbd_flags="${smbd_flags=\"-D\"}"
# Requirements
required_files="${samba_config}"
required_dirs="${samba_lockdir}"
samba_checkconfig() {
    echo -n "Performing sanity check on Samba configuration: "
    if "${testparm_command}" -s ${samba_config:+"${samba_config}"} >/dev/null 2>&1; then
        echo "OK"
    else
        echo "FAILED"
        return 1
    fi
}

samba_start_precmd() {
    # XXX: Never delete winbindd_idmap, winbindd_cache and group_mapping
    if [ -n "${samba_lockdir}" -a -d "${samba_lockdir}" ]; then
        echo -n "Removing stale Samba tdb files: "
        for file in brlock.tdb browse.dat connections.tdb gencache.tdb \
                    locking.tdb messages.tdb namelist.debug sessionid.tdb \
                    unexpected.tdb
        do
            rm "${samba_lockdir}/${file}" </dev/null 2>/dev/null && echo -n '.'
        done
        echo " done"
    fi
}

samba_rcvar_cmd() {
    # Prevent recursive calling
    unset "${rc_arg}_cmd" "${rc_arg}_precmd" "${rc_arg}_postcmd"
    # Check master variable
    echo "# ${name}"
    if [ -n "${rcvar}" ]; then
        # Use original configured value
        if checkyesno "real_${rcvar}"; then
            echo "\$${rcvar}=YES"
        else
            echo "\$${rcvar}=NO"
        fi
    fi
    # Check dependent variables
    samba_cmd "${_rc_prefix}${rc_arg}" ${rc_extra_args}
}

samba_reload_cmd() {
    local name rcvar command pidfile
    # Prevent recursive calling
    unset "${rc_arg}_cmd" "${rc_arg}_precmd" "${rc_arg}_postcmd"
    # Apply to all the daemons
    for name in ${samba_daemons}; do
        rcvar=$(set_rcvar)
        command="/usr/local/sbin/${name}"
        pidfile="/var/run/${name}${pid_extra}.pid"
        # Daemon should be enabled and running
        if [ -n "${rcvar}" ] && checkyesno "${rcvar}"; then
            if [ -n "$(check_pidfile "${pidfile}" "${command}")" ]; then
                debug "reloading ${name} configuration"
                echo "Reloading ${name}."
                # XXX: Hack with pid_extra
                "${smbcontrol_command}" "${name}${pid_extra}" 'reload-config' ${command_args} >/dev/null 2>&1
            fi
        fi
    done
}

samba_cmd() {
    local name rcvar command pidfile samba_daemons
    # Prevent recursive calling
    unset "${rc_arg}_cmd" "${rc_arg}_precmd" "${rc_arg}_postcmd"
    # Stop processes in the reverse to order
    if [ "${rc_arg}" = "stop" ] ; then
        samba_daemons=$(reverse_list ${samba_daemons})
    fi
    # Apply to all the daemons
    for name in ${samba_daemons}; do
        rcvar=$(set_rcvar)
        command="/usr/local/sbin/${name}"
        pidfile="/var/run/${name}${pid_extra}.pid"

        run_rc_command "${_rc_prefix}${rc_arg}" ${rc_extra_args}
    done
}

run_rc_command "$1"