|
|
|
|
| Компьютерный форум OSzone.net » Linux и FreeBSD » Общий по Linux » Помогите пожалуйста с конфигурацией ядра под Mandrake 9.1 |
|
|
Помогите пожалуйста с конфигурацией ядра под Mandrake 9.1
|
|
Новый участник Сообщения: 6 |
Помогите пожалуйста с конфигурацией ядра
пытаюсь собрать его уже 2 недели и постоянно возникают какието ошибки Вышлите пожалуйста файл конфигурации ----- Моя конфигурация PIII/256mb/HDD-10Gb/ESS Solo1/Net IntelPro100/Win Modem LT/Ati Mobility 8mb/- COMPAQ ARMADA E500 [s]Исправлено: eu, 11:08 27-06-2003[/s] Добавлено: Linux version 2.4.21-0.13mdk (flepied@bi.mandrakesoft.com) (gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3800 (reserved) BIOS-e820: 000000000fff3800 - 0000000010000000 (ACPI NVS) 255MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=linux ro root=306 devfs=mount acpi=off Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Initializing CPU#0 Detected 696.414 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 1389.36 BogoMIPS Memory: 255764k/262080k available (1410k kernel code, 5928k reserved, 1118k data, 136k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030122 ACPI: Disabled via command line (acpi=off) PCI: PCI BIOS revision 2.10 entry at 0xf0478, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Discovered primary peer bus 04 [IRQ] PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 vesafb: framebuffer at 0x40000000, mapped to 0xd0800000, size 8128k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at c000:509c vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... no good signature found. Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS02 at 0x03e8 (irq = 4) is a 16550A PCI: Found IRQ 11 for device 00:09.1 PCI: Sharing IRQ 11 with 00:08.0 PCI: Sharing IRQ 11 with 00:09.0 Redundant entry in serial pci_table. Please send the output of lspci -vv, this message (11c1,0445,8086,2204) and the manufacturer and name of serial board or modem board to serial-pci-info@lists.sourceforge.net. register_serial(): autoconfig failed RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3420-0x3427, BIOS settings: hda:DMA, hdb:DMA hda: HITACHI_DK23AA-12, ATA DISK drive hdb: Compaq DVD-ROM DRN-8080B, ATAPI CD/DVD-ROM drive blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff) ide2: ports already in use, skipping probe ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: host protected area => 1 hda: 23579136 sectors (12073 MB) w/512KiB Cache, CHS=1559/240/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 108k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 136k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:07.2 usb-uhci.c: USB UHCI at I/O 0x3400, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal Adding Swap: 506480k swap-space (priority -1) hub.c: new USB device 00:07.2-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x46d/0xc00e) is not claimed by any active driver. usb.c: registered new driver hiddev usb.c: registered new driver hid input0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:2.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice usb.c: registered new driver usb_mouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866 MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866 eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others PCI: Found IRQ 11 for device 00:09.0 PCI: Sharing IRQ 11 with 00:08.0 PCI: Sharing IRQ 11 with 00:09.1 eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:59:1A:E6:54, IRQ 11. Board assembly 98004c-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xdbd8681d). inserting floppy driver for 2.4.21-0.13mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 PCI: Found IRQ 11 for device 00:08.0 PCI: Sharing IRQ 11 with 00:09.0 PCI: Sharing IRQ 11 with 00:09.1 maestro: Configuring ESS Maestro 2E found at IO 0x3000 IRQ 11 maestro: subvendor id: 0xb1120e11 maestro: not attempting power management. maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf maestro: 1 channels configured. maestro: version 0.15 time 15:30:11 Mar 14 2003 hdb: ATAPI 24X DVD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 mtrr: 0x40000000,0x800000 overlaps existing 0x40000000,0x400000 mtrr: 0x40000000,0x800000 overlaps existing 0x40000000,0x400000 udf: registering filesystem cdrom: open failed. UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0 UDF-fs DEBUG super.c:1426:udf_read_super: Multi-session=0 UDF-fs DEBUG super.c:415:udf_vrs: Starting at sector 16 (2048 byte sectors) UDF-fs DEBUG super.c:442:udf_vrs: ISO9660 Primary Volume Descriptor found UDF-fs DEBUG super.c:439:udf_vrs: ISO9660 Boot Record found UDF-fs DEBUG super.c:445:udf_vrs: ISO9660 Supplementary Volume Descriptor found UDF-fs DEBUG super.c:451:udf_vrs: ISO9660 Volume Descriptor Set Terminator found UDF-fs: No VRS found ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no, vol_desc_start=0 UDF-fs DEBUG super.c:1426:udf_read_super: Multi-session=0 UDF-fs DEBUG super.c:415:udf_vrs: Starting at sector 16 (2048 byte sectors) UDF-fs DEBUG super.c:442:udf_vrs: ISO9660 Primary Volume Descriptor found UDF-fs DEBUG super.c:445:udf_vrs: ISO9660 Supplementary Volume Descriptor found UDF-fs DEBUG super.c:451:udf_vrs: ISO9660 Volume Descriptor Set Terminator found UDF-fs: No VRS found ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A cdrom: open failed. cdrom: open failed. cdrom: open failed. mtrr: 0x40000000,0x800000 overlaps existing 0x40000000,0x400000 mtrr: 0x40000000,0x800000 overlaps existing 0x40000000,0x400000 mtrr: 0x40000000,0x800000 overlaps existing 0x40000000,0x400000 mtrr: 0x40000000,0x800000 overlaps existing 0x40000000,0x400000 Добавлено: E-mail: admin@compozitor.spb.ru , titan001@nwgsm.com |
|
|
Отправлено: 10:06, 27-06-2003 |
Член форума Сообщения: 703
|
Профиль | Сайт | Отправить PM | Цитировать хмммммммммм ... тут без тяжелой артилерии типа Ruslandh и Barracuda явно не обойтись ...
|
|
------- Отправлено: 23:07, 04-07-2003 | #11 |
|
Новый участник Сообщения: 6
|
Профиль | Отправить PM | Цитировать Люди так что делать
Добавлено: Тут конфиг лежит посмотрите пожалуйста http://www.atomstroy.spb.ru/config.bz2 |
|
Отправлено: 00:29, 05-07-2003 | #12 |
|
Новый участник Сообщения: 43
|
Профиль | Отправить PM | Цитировать А ты попробуй возьми старый, родной конфиг в нём что надо акуратно подправь и с ним собирай...
|
|
Отправлено: 07:56, 05-07-2003 | #13 |
|
Новый участник Сообщения: 6
|
Профиль | Отправить PM | Цитировать пробовал таже херь только при загрузке не может какието модули найти
|
|
Отправлено: 22:18, 07-07-2003 | #14 |
Guest |
eu
Цитата:
Какие модули? make mrproper make [menu/x]config make dep make clean make install make modules make modules_install Так собираешь??? Добавлено: make clean можно не ставить или make mrproper или make clean |
|
|
Отправлено: 06:38, 08-07-2003 | #15 |
|
Участник сейчас на форуме |
 |
Участник вне форума |
 |
Автор темы |
 |
Сообщение прикреплено |
| |||||
| Название темы | Автор | Информация о форуме | Ответов | Последнее сообщение | |
| Помогите с конфигурацией!!! | vahter | Выбор отдельных компонентов компьютера и конфигурации в целом | 13 | 25-10-2009 00:10 | |
| Нужна помощь с конфигурацией под разгон и апгрейд Core 2 Duo E8400 | Serega-dizel | Выбор отдельных компонентов компьютера и конфигурации в целом | 17 | 08-05-2009 07:02 | |
| Помогите с конфигурацией пожалуйста | Masacom | Выбор отдельных компонентов компьютера и конфигурации в целом | 14 | 09-02-2009 19:45 | |
| Помогите с конфигурацией... | _Snake_ | Выбор отдельных компонентов компьютера и конфигурации в целом | 9 | 16-05-2008 11:43 | |
| Помогите, пожалуйста определиться с конфигурацией компьютера на 1500$-1700$ | kseniia | Выбор отдельных компонентов компьютера и конфигурации в целом | 13 | 11-05-2007 09:21 | |
|
|
Время: 14:20. | © OSzone.net 2001-
|
|
Powered by: vBulletin Copyright ©2000 - 2025, Jelsoft Enterprises Ltd. |
