Guest
|
Профиль
| Цитировать
Подскажите пожалуйста, действительно надо в фирму нести, или Вы шутите, и что делать мне?
-----------------------[Background information]-----------------------
DTemp version: 1.00 build 34 (RC8)
Started under Win9x kernel, version 4.10.2222
Number of processors: 1
Processor type: x86 Family 6 Model 8 Stepping 10
-------------------------[Device information]-------------------------
Device location: Primary master
Compatiblity: ATA/ATAPI-5
Model: ST380021A
Firmware revision: 3.19
Serial number: 3HV26Y4K
Disk capacity: 74.53 Gb (156301488 sectors)
Buffer size: 2048 Kb
Identify information CRC: Ok
----------------------[Device S.M.A.R.T. status]----------------------
Attribute Value Thresh Raw Flags
----------------------------------------------------------------------
Raw read error rate 79 34 0000029E46DDh CR OC PR ER
Spin up time 70 0 000000000000h CR OC
Start/stop count 100 20 00000000000Eh OC EC SP
Reallocated sector count 100 36 000000000000h CR OC EC SP
Seek error rate 75 30 0000020C50B8h CR OC PR ER
Power-on time count 99 0 0000000003D0h OC EC SP
Spin up retry count 100 97 000000000000h CR OC EC
Device power cycle count 100 20 000000000101h OC EC SP
Temperature 34 0 000000000022h OC SP
Hardware ECC recovered 79 0 0000029E46DDh OC ER EC
Current pending sector count 100 0 000000000000h OC EC
Off-line uncorrectable sector count 100 0 000000000000h EC
Ultra ATA CRC error rate 200 0 000000000000h OC PR ER EC SP
Write error rate 100 0 000000000000h
Attribute 202 100 0 000000000000h OC EC SP
----------------------------------------------------------------------
CR-life critical OC-online collection PR-performance related
ER-error rate EC-event count SP-self preserving
Attributes CRC: Ok Thresholds CRC: Ok
------------------------[SmartVSD information]------------------------
Driver location: C:\WINDOWS\SYSTEM\IOSUBSYS\smartvsd.vxd
Vendor: Microsoft Corporation
File version: 4.10.2222
Developed for: Microsoft(R) Windows(R) Operating System
SmartVsd API version: 1.2
--------------------------[Device features]---------------------------
Maximal transfer block in sectors: 16, current: 16
Transfer modes:
PIO: 0-4
Single word DMA: not supported
Multi word DMA: 0-2
UltraDMA: 0-5
Current transfer mode: Ultra DMA-4
Drive features:
LBA supported, 48 bit addressing not supported
SMART supported, enabled
Device status: Ok
Attributes structure revision: 0Ah
Thresholds structure revision: 0Ah
Pre-power mode attributes autosave supported
Attributes autosave after event supported
Temperature check capability found
SMART error logging not supported
SMART self test not supported
Offline data collection supported
Suspend offline collection after new host command
Offline read scanning supported
Offline self test supported
Security mode supported, disabled
Master password revision code: unknown
Security locked: no
Security frozen: no
Security count expired: no
Security erase time: unknown
Enchanced security erase not supported
Security level: high
Write cache supported, enabled
Read look ahead supported, enabled
Host protected area supported, enabled
Microcode downloading supported
Power management supported, enabled
Advanced power management not supported
Automatic acoustic management supported, disabled
Recommended AAM value: 80h (minimum acoustic emanation level)
Current AAM value: 00h (vendor specific value)
Media serial number not supported
----------------------------------------------------------------------
eagate
V1.04 ENGLISH 00000000 000
report file created 11/28/2002 @ 2:48 AM
The following information has been generated by
The generic diagnostic. We hope this information
will help you recognize and resolve potential data access problems
in a timely manner.
* Test results indicate there was not a problem with a drive on your
system.
This information describes your system and drives.
Processor Intel Pentium Pro or equivalent
BIOS Date 03/23/00
Conventional Memory size 639
Extended Memory size 261056
IO Channel type PCI
------
CMOS: AT-Style Drive1=47, Drive2=0 (Drive Tables not located)
There was 1 hard disk drive detected:
DISK SIZE MODEL
---- ------- -----
1 80031 MB ST380021A
Serial Number: 3HV26Y4K
CommandSet = XBIOS, RECIO, 1K, 2K, EXT13, PORTEDIO
Int13 Num = 80, MAX CHS = 9729x255x63, PHYS CHS = 65535x16x63.
ParmTable CHS,Rsvd = 0x0x0, 00
Interface = ATA
Configmode = 0, Translator Mode=0
MultiSec=16, BufferSize=4096, Capabilities=2F00
Security = 0001, IDECommandSet = 346B4B01
Partition Cylinder Size
# Type Start End MB
1 FAT 32 0 379 3125.0
2 EXTENDED 380 9728 11367.1
- FAT 32 380 762 3150.0
- FAT 32 763 2675 15735.0
- FAT 32 2676 4588 15735.0
- FAT 32 4589 6501 15735.0
- FAT 32 6502 8414 15735.0
- FAT 32 8415 9728 10808.0
Diagnostic Results:
Disk 1 Quick Test Result: NO ERRORS
Disk 1 SMART Test Result: Passed
Disk 1 Surface Test Result: NO ERRORS
S.M.A.R.T., (S)elf (M)onitoring (A)nalysis and (R)eporting
(T)echnology, a built-in hard disk drive failure prediction method
reports an 'Alert' if a problem has occurred. It reports 'Passed'
if no problems are found and 'Unsupported' if a hard disk drive
does not support S.M.A.R.T.
Partition Check Results
Drive 1 Partitions:
Partition 1 Result: No Errors
1690028 KBytes in 19606 files.
1436 directories were found.
9125 KBytes in 196 deleted files.
2 deleted directories were found.
Partition 2 Result: No Errors
2899353 KBytes in 5376 files.
325 directories were found.
0 KBytes in 1 deleted files.
0 deleted directories were found.
Partition 3 Result: No Errors
15026501 KBytes in 55558 files.
2190 directories were found.
744110 KBytes in 1661 deleted files.
2 deleted directories were found.
Partition 4 Result: MINOR ERROR(S)
0 CRITICAL STRUCTURE ERROR(S), 1 NON-CRITICAL STRUCTURE ERROR(S).
14375429 KBytes in 46051 files.
1283 directories were found.
423619 KBytes in 76 deleted files.
0 deleted directories were found.
ERROR SUMMARY:
Orphaned Data Blocks 1
Partition 5 Result: FAILED
1 CRITICAL STRUCTURE ERROR(S), 0 NON-CRITICAL STRUCTURE ERROR(S).
14176443 KBytes in 18724 files.
1107 directories were found.
720169 KBytes in 88 deleted files.
2 deleted directories were found.
ERROR SUMMARY:
Invalid Entry Name 1
Partition 6 Result: No Errors
14021036 KBytes in 13710 files.
1103 directories were found.
533961 KBytes in 99 deleted files.
0 deleted directories were found.
Partition 7 Result: No Errors
8636336 KBytes in 32366 files.
1942 directories were found.
310 KBytes in 13 deleted files.
1 deleted directories were found.
*********************************************
DIAGNOSTIC RESULTS:
Drive 1 (ST380021A)
-Passed all physical tests
-Partition 5 failed the File Structure
Test, other supported partitions passed
or passed with minor errors
System Memory Test not supported
RECOMMENDATIONS:
-If you have data to recover, see
the readme.txt file for information.
-If you have NOT lost data, use normal
system tools to repair the errors.
-Running the generic diagnostic regularly
will help to monitor your hard disk
drive and safeguard your data.
Use of the diagnostic and this information is controlled by the
license agreement included with the SeaTools Disc Diagnostic
software product. Any use for commercial or financial gain, including
but not limited to, use in performing technical, consulting or data
recovery services is prohibited without the prior written approval
of Seagate Technology, Inc
Copyright (c) 1999-2000 Seagate Technology, Inc.
|