DmitriyDDV

Пожалуйста помогите разобраться с ошибкой которая приводит к самопроизвольной перезагрузке системы, но не всегда (в журнале она фиксируется постоянно):

Тип события: Ошибка
Источник события: System Error
Категория события: (102)
Код события: 1003
Дата: 23.03.2006
Время: 13:34:34
Пользователь: Н/Д
Компьютер: RECH79
Описание:
Код ошибки 0000009c, параметр1 00000000, параметр2 8054da70, параметр3 b2000000, параметр4 1040080f.
Данные:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 39 0000009
0020: 63 20 20 50 61 72 61 6d c Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 30 2c 20 000000,
0038: 38 30 35 34 64 61 37 30 8054da70
0040: 2c 20 62 32 30 30 30 30 , b20000
0048: 30 30 2c 20 31 30 34 30 00, 1040
0050: 30 38 30 66 080f

Система Abit IS10, CeleronD 2,53 Gz, 256 Mb память, винт Maxtor 40Gb.

Уже поменял процессор, память, переустанавливал систему.

Скормил minidump WinDbg и получил следующее:

Microsoft (R) Windows Debugger Version 6.6.0003.5
Copyright (c) Microsoft Corporation. All rights reserved.


Loading Dump File [C:\WINDOWS\Minidump\Mini032306-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

Symbol search path is: C:\WINDOWS\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Windows XP Kernel Version 2600 (Service Pack 2) UP Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055ab20
Debug session time: Thu Mar 23 12:04:42.593 2006 (GMT+2)
System Uptime: 0 days 0:03:52.140
Unable to load image ntoskrnl.exe, Win32 error 2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
Loading Kernel Symbols
.................................................................................................... ........
Loading User Symbols
Loading unloaded module list
.............
*** WARNING: Unable to verify timestamp for hal.dll
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9C, {0, 8054da70, b2000000, 1040080f}

Probably caused by : ntoskrnl.exe ( nt!KdPitchDebugger+ef4 )

Followup: MachineOwner
---------

kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************

MACHINE_CHECK_EXCEPTION (9c)
A fatal Machine Check Exception has occurred.
KeBugCheckEx parameters;
x86 Processors
If the processor has ONLY MCE feature available (For example Intel
Pentium), the parameters are:
1 - Low 32 bits of P5_MC_TYPE MSR
2 - Address of MCA_EXCEPTION structure
3 - High 32 bits of P5_MC_ADDR MSR
4 - Low 32 bits of P5_MC_ADDR MSR
If the processor also has MCA feature available (For example Intel
Pentium Pro), the parameters are:
1 - Bank number
2 - Address of MCA_EXCEPTION structure
3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error
4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error
IA64 Processors
1 - Bugcheck Type
1 - MCA_ASSERT
2 - MCA_GET_STATEINFO
SAL returned an error for SAL_GET_STATEINFO while processing MCA.
3 - MCA_CLEAR_STATEINFO
SAL returned an error for SAL_CLEAR_STATEINFO while processing MCA.
4 - MCA_FATAL
FW reported a fatal MCA.
5 - MCA_NONFATAL
SAL reported a recoverable MCA and we don't support currently
support recovery or SAL generated an MCA and then couldn't
produce an error record.
0xB - INIT_ASSERT
0xC - INIT_GET_STATEINFO
SAL returned an error for SAL_GET_STATEINFO while processing INIT event.
0xD - INIT_CLEAR_STATEINFO
SAL returned an error for SAL_CLEAR_STATEINFO while processing INIT event.
0xE - INIT_FATAL
Not used.
2 - Address of log
3 - Size of log
4 - Error code in the case of x_GET_STATEINFO or x_CLEAR_STATEINFO
AMD64 Processors
1 - Bank number
2 - Address of MCA_EXCEPTION structure
3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error
4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error
Arguments:
Arg1: 00000000
Arg2: 8054da70
Arg3: b2000000
Arg4: 1040080f

Debugging Details:
------------------

NOTE: This is a hardware error. This error was reported by the CPU
via Interrupt 18. This analysis will provide more information about
the specific error. Please contact the manufacturer for additional
information about this error and troubleshooting assistance.

This error is documented in the following publication:

- IA-32 Intel(r) Architecture Software Developer's Manual
Volume 3: System Programming Guide

Bit Mask:

MA Model Specific MCA
O ID Other Information Error Code Error Code
VV SDP ___________|____________ _______|_______ _______|______
AEUECRC| | | |
LRCNVVC| | | |
^^^^^^^| | | |
6 5 4 3 2 1
3210987654321098765432109876543210987654321098765432109876543210
----------------------------------------------------------------
1011001000000000000000000000000000010000010000000000100000001111


VAL - MCi_STATUS register is valid
Indicates that the information contained within the IA32_MCi_STATUS
register is valid. When this flag is set, the processor follows the
rules given for the OVER flag in the IA32_MCi_STATUS register when
overwriting previously valid entries. The processor sets the VAL
flag and software is responsible for clearing it.

UC - Error Uncorrected
Indicates that the processor did not or was not able to correct the
error condition. When clear, this flag indicates that the processor
was able to correct the error condition.

EN - Error Enabled
Indicates that the error was enabled by the associated EEj bit of the
IA32_MCi_CTL register.

PCC - Processor Context Corrupt
Indicates that the state of the processor might have been corrupted
by the error condition detected and that reliable restarting of the
processor may not be possible.

BUSCONNERR - Bus and Interconnect Error BUS{LL}_{PP}_{RRRR}_{II}_{T}_err
These errors match the format 0000 1PPT RRRR IILL



Concatenated Error Code:
--------------------------
_VAL_UC_EN_PCC_BUSCONNERR_F

This error code can be reported back to the manufacturer.
They may be able to provide additional information based upon
this error. All questions regarding STOP 0x9C should be
directed to the hardware manufacturer.

BUGCHECK_STR: 0x9C_IA32_GenuineIntel

CUSTOMER_CRASH_COUNT: 2

DEFAULT_BUCKET_ID: DRIVER_FAULT

LAST_CONTROL_TRANSFER: from 806f18df to 805339ae

SYMBOL_ON_RAW_STACK: 1

STACK_TEXT:
8054da48 806f18df 0000009c 00000000 8054da70 nt!KeBugCheckEx+0x1b
8054db74 806ecc2e 80042000 00000000 00000000 hal!HalpGetFeatureBits+0x75
00000000 00000000 00000000 00000000 00000000 hal!HalpWriteCmosTime+0xaa


STACK_COMMAND: dds @$csp ; kb

FOLLOWUP_IP:
nt!KdPitchDebugger+ef4
8054da70 0200 add al,[eax]

FAULTING_SOURCE_CODE:


FOLLOWUP_NAME: MachineOwner

SYMBOL_NAME: nt!KdPitchDebugger+ef4

MODULE_NAME: nt

IMAGE_NAME: ntoskrnl.exe

DEBUG_FLR_IMAGE_TIMESTAMP: 41108004

FAILURE_BUCKET_ID: 0x9C_IA32_GenuineIntel_nt!KdPitchDebugger+ef4

BUCKET_ID: 0x9C_IA32_GenuineIntel_nt!KdPitchDebugger+ef4

Followup: MachineOwner
---------