[pasha4ur]

►AGP & P2P Bridge Control
Scroll to this item and press <Enter> to view the following screen:

Phoenix - AwardBIOS CMOS Setup Utility AGP &P2P Bridge Control

AGP Aperture Size [125 MB]
AGP Mode [4X]
AGP Driving Control [Auto]
AGP Driving Value DA
AGP Fast Write [Disabled]
AGP Master 1 WS Write [Disabled]
AGP Master WS Read [Disabled]

Item Help
Menu Level ►

+/-/PU/PD.Value: F10: Save ESC: Exit F1:GeneralHelp
F6:Fail-Safe Defaults F7:Optimized Defaults

AGP Aperture Size (128 MB)
This item defines the size of the aperture if you use an AGP graphics adapter. The AGP aperture refers to a section of the PCI memory address range used for graphics memory. We recommend that you leave this item at the default value.
AGP Mode (4X)
This item allows you to enable or disable the caching of display data for the processor video memory. Enabling AGP-4X Mode can greatly improve the display speed. Disable this item if your graphics display card does not support this feature.
AGP Driving Control (Auto)
This item is used to signal driving current on AGP cards to auto or manual. Some AGP cards need stronger than normal driving current in order to oper¬ate. We recommend that you set this item to the default.
• AGP Driving Value: When AGP Driving Control is set to Manual,
use this item to set the AGP current driving value. AGP Fast Write (Disabled)
This item lets you enable or disable the caching of display data for the video memory of the processor. Enabling this item can greatly improve the display speed. Disable this item if your graphics display card does not support this feature.


И что тут можно поменять (я комп месяца 5 назад первый раз открыл, а в Биос месяца 3 назад залез ). Помогите неучу.