[Skynet]

Belansky
Нет там вроде этого ни чипа, ни сетевой моей

[Belansky]

Skynet
А не пробовали device wlan # 802.11 support в ядро добавить?

[Skynet]

Belansky
Пробовал, оставил вот так вот в файле конфигурации:
# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
и собрал новое ядро и установил, но вроде ничего не изменилось.
Или я не то сделал ?

[Belansky]

Skynet
А после пересборки ядра сетевая в dmesg как-либо отображается?

[Skynet]

Belansky
Да как и было - ugen0: vendor 0x1371 product 0x0013, rev 1.10/1.00 addr 2

[Belansky]

Skynet
А не могли бы Вы весь свой dmesg сюда запостить?

[Skynet]

Belansky, вот:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Thu Feb 17 14:59:22 EET 2005
root@farscape:/usr/obj/usr/src/sys/FARSCAPE
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x650 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 167772160 (160 MB)
avail memory = 158728192 (151 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Ali Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <display, VGA> at device 14.0 (no driver attached)
atapci0: <AcerLabs Aladdin UDMA33 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device
15.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci0: <OPTi 82C861 (FireLink) USB controller> mem 0xdbfee000-0xdbfeefff irq 11 at device 16.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OPTi 82C861 (FireLink) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: OPTi OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: vendor 0x1371 product 0x0013, rev 1.10/1.00, addr 2
atapci1: <SiI 0680 UDMA133 controller> port 0xdf40-0xdf4f,0xdfe0-0xdfe3,0xdf90-0xdf97,0xdff0-0xdff3,0xdfa0-0xd
fa7 mem 0xdbfeff00-0xdbfeffff irq 9 at device 18.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem 0xec000-0xeffff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ed1: <Genius LAN GE2000III LAN Adapter > at port 0x280-0x29f irq 5 on isa0
ed1: [GIANT-LOCKED]
ed1: Ethernet address: 00:c0:df:50:c3:23
ed1: if_start running deferred for Giant
type NE2000 (16 bit)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0a03> can't assign resources (memory)
Timecounter "TSC" frequency 334092498 Hz quality 800
Timecounters tick every 10.000 msec
acd0: CDROM <NEC CD-ROM DRIVE:282/4.62> at ata0-master UDMA33
ad4: 9768MB <ST310212A/3.02> [19846/16/63] at ata2-master UDMA66
ad6: 3093MB <FUJITSU MPB3032ATU/2009> [6704/15/63] at ata3-master UDMA33
Mounting root from ufs:/dev/ad4s1a

[Belansky]

Skynet
Судя по всему, не видит система Вашего устройства.

[Skynet]

Belansky
А какже это:
ugen0: vendor 0x1371 product 0x0013, rev 1.10/1.00, addr 2 ?

[Belansky]

Skynet
Нет. Это USB-интерфейс в целом. А в каталоге /dev/ что-либо похожее на сетевой интерфейс появляется?