Вот данные с последнего краша
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: STDUViewerApp.exe
P2: 1.6.375.0
P3: 553d4818
P4: ntdll.dll
P5: 10.0.10586.672
P6: 580efaf8
P7: c0000006
P8: 00064329
P9:
P10:
Attached files:
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_STDUViewerApp.ex_d42f1b91c4ee23cc713be8fde c3871792257e_908caf6a_6694e270
Analysis symbol:
Rechecking for solution: 0
Report Id: 35efb1f9-bb98-46e9-af27-9c9e1e8190cf
Report Status: 6
Hashed bucket:
И ему еще предшествовали на несколько минут более ранние две записи об ошибке этого же приложения но с в столбце Source стоит источник - Application Error
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program STDUViewerApp.exe because of this error.
Program: STDUViewerApp.exe
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional Data
Error value: C000026E
Disk type: 0
И еще более раннее сообщение
Log Name: Application
Source: Application Error
Date: 7/22/2017 11:13:26
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: MICROSO-JAKITF9
Description:
Faulting application name: STDUViewerApp.exe, version: 1.6.375.0, time stamp: 0x553d4818
Faulting module name: ntdll.dll, version: 10.0.10586.672, time stamp: 0x580efaf8
Exception code: 0xc0000006
Fault offset: 0x00064329
Faulting process id: 0x1a1c
Faulting application start time: 0x01d2f7403913a137
Faulting application path: d:\Program Files (x86)\STDU Viewer\STDUViewerApp.exe
Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
Report Id: 35efb1f9-bb98-46e9-af27-9c9e1e8190cf
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2017-07-22T08:13:26.887685800Z" />
<EventRecordID>27335</EventRecordID>
<Channel>Application</Channel>
<Computer>MICROSO-JAKITF9</Computer>
<Security />
</System>
<EventData>
<Data>STDUViewerApp.exe</Data>
<Data>1.6.375.0</Data>
<Data>553d4818</Data>
<Data>ntdll.dll</Data>
<Data>10.0.10586.672</Data>
<Data>580efaf8</Data>
<Data>c0000006</Data>
<Data>00064329</Data>
<Data>1a1c</Data>
<Data>01d2f7403913a137</Data>
<Data>d:\Program Files (x86)\STDU Viewer\STDUViewerApp.exe</Data>
<Data>C:\WINDOWS\SYSTEM32\ntdll.dll</Data>
<Data>35efb1f9-bb98-46e9-af27-9c9e1e8190cf</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
