Имя пользователя:
Пароль:
 

Показать сообщение отдельно

- - -


Contributor


Сообщения: 12195
Благодарности: 2131

Профиль | Отправить PM | Цитировать


Цитата Инсульт:
Вообще то множитель у этого CPU 20х166=3320(3200мгц) в турбобусте и 20х133=2660(2500мгц) в нормальном режиме. »
Не согласен, частота шины при турбобусте не меняется (да и как она может меняться?), только множитель.
В штатном режиме у этого ЦП 20 х 133 = 2667 МГц, в турбобуст 24 х 133 = 3200 МГц.
Цитата Wusa:
базовая частота процессора составляет 2.66 ГГц, а разгоняется он до 2.96-3.06, но не больше »
Это может означать что ядра например работают на разных частотах (на разных множителях). Частота ядер также ограничена величиной TDP в даташит пишут про это:
Скрытый текст
3.4.1 Intel Turbo Boost Technology Processor Frequency
The processor’s rated frequency assumes that all execution cores are running an
application at the thermal design power (TDP
). However, under typical operation, not
all cores are active. Therefore most applications are consuming less than the TDP at the
rated frequency. To take advantage of the available TDP headroom, the active cores can
increase their operating frequency.
To determine the highest performance freque
ncy amongst active cores, the processor
takes the following into consideration:
• The number of cores operating in the C0 state.
• The estimated current consumption.
• The estimated power consumption.
• The temperature.
Any of these factors can affect the maximu
m frequency for a given workload. If the
power, current, or thermal limit is reached, the processor will automatically reduce the
frequency to stay with its TDP limit.

Wusa, это смотря через какие программы смотреть, смотри через HWiNFO, там видно отдельно по ядрам.

Последний раз редактировалось Normal, 17-09-2016 в 22:53.

Это сообщение посчитали полезным следующие участники:

Отправлено: 22:45, 17-09-2016 | #31