Новый участник
Сообщения: 6
Благодарности: 0
|
Профиль
|
Отправить PM
| Цитировать
MakaBooka
Вчера вечером посмотрел, что говорят dmesg и gpart show, к сожалению я только осваиваю и не все понятно, начал разбираться, я не отсоединял диск с установленной Windows 7, он определился как ada2
- это gpart show
Код:  nas4free: ~ # gpart show
=> 63 312581745 ada0 MBR (149G)
63 2088387 1 freebsd [active] (1G)
2088450 302616405 2 freebsd (144G)
304704855 7871850 3 freebsd (3.8G)
312576705 5103 - free - (2.5M)
=> 34 5860533101 ada1 GPT (2.7T)
34 262144 1 ms-reserved (128M)
262178 2014 - free - (1M)
264192 3031912448 2 linux-data (1.4T)
3032176640 2828355584 3 linux-data (1.3T)
5860532224 911 - free - (455k)
=> 63 312581745 ada2 MBR (149G)
63 1985 - free - (992k)
2048 106493952 1 ntfs [active] (50G)
106496000 206082048 2 ebr (98G)
312578048 3760 - free - (1.9M)
=> 63 1953525105 ada3 MBR (931G)
63 1985 - free - (992k)
2048 1953519616 1 ntfs [active] (931G)
1953521664 3504 - free - (1.7M)
=> 0 2088387 ada0s1 BSD (1G)
0 65 - free - (32k)
65 2088320 1 freebsd-ufs (1G)
2088385 2 - free - (1.0k)
=> 0 302616405 ada0s2 BSD (144G)
0 62 - free - (31k)
62 302616320 1 freebsd-ufs (144G)
302616382 23 - free - (11k)
=> 0 206082048 ada2s2 EBR (98G)
0 206082048 1 ntfs (98G)
а это - dmesg
Код: nas4free: ~ # dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE-p5 #0 r254466M: Sat Aug 17 22:54:54 CEST 2013
root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
CPU: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz (1800.10-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x6fd Family = 6 Model = f Stepping = 13
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 4294967296 (4096 MB)
avail memory = 4087332864 (3897 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <A_M_I_ OEMRSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0x14, should be 0x07 (20110527/tbutils-282)
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16 at device 0.0 on pci1
uhci0: <Intel 82801I (ICH9) USB controller> port 0xa800-0xa81f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xa880-0xa89f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0xac00-0xac1f irq 18 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf9fffc00-0xf9ffffff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
hdac0: <Intel 82801I HDA Controller> mem 0xf9ff8000-0xf9ffbfff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <JMicron JMB368 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f irq 16 at device 0.0 on pci3
ata2: <ATA channel> at channel 0 on atapci0
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0
msk0: Ethernet address: 00:1f:c6:74:74:13
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
uhci3: <Intel 82801I (ICH9) USB controller> port 0xa080-0xa09f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0xa400-0xa41f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0xa480-0xa49f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf9fff800-0xf9fffbff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
ral0: <Ralink Technology RT3060> mem 0xfeaf0000-0xfeafffff irq 16 at device 0.0 on pci5
pcib6: <PCI-PCI bridge> at device 1.0 on pci5
pci6: <PCI bus> on pcib6
pci6: <multimedia> at device 4.0 (no driver attached)
pci6: <multimedia> at device 8.0 (no driver attached)
fwohci0: <Texas Instruments TSB12LV26> mem 0xfebff000-0xfebff7ff,0xfebf8000-0xfebfbfff irq 17 at device 12.0 on pci6
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:30:8d:0a:02:82:b4:38
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:30:8d:0a:02:82:b4:38 @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0xc7040000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:30:8d:82:b4:38
fwe0: Ethernet address: 02:30:8d:82:b4:38
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
fwohci1: <VIA Fire II (VT6306)> port 0xec00-0xec7f mem 0xfeaef800-0xfeaeffff irq 20 at device 2.0 on pci5
fwohci1: OHCI version 1.10 (ROM=1)
fwohci1: No. of Isochronous channels is 4.
fwohci1: EUI64 00:1e:8c:00:01:35:0e:67
fwohci1: Phy 1394a available S400, 2 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwip1: <IP over FireWire> on firewire1
fwip1: Firewire address: 00:1e:8c:00:01:35:0e:67 @ 0xfffe00000000, S400, maxrec 2048
dcons_crom1: <dcons configuration ROM> on firewire1
dcons_crom1: bus_addr 0xc7040000
dcons_crom1: dcons_paddr is already set
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:1e:8c:35:0e:67
fwe1: Ethernet address: 02:1e:8c:35:0e:67
fwohci1: Initiate bus reset
fwohci1: fwohci_intr_core: BUS reset
fwohci1: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port 0x9000-0x9007,0x8c00-0x8c03,0x8880-0x8887,0x8800-0x8803,0x8480-0x848f,0x8400-0x840f irq 22 at device 31.2 on pci0
ata3: <ATA channel> at channel 0 on atapci1
ata4: <ATA channel> at channel 1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH9 SATA300 controller> port 0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 22 at device 31.5 on pci0
ata5: <ATA channel> at channel 0 on atapci2
ata6: <ATA channel> at channel 1 on atapci2
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ctl: CAM Target Layer loaded
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 10.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to accept, logging disabled
iSCSI boot driver version 0.2.6
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire0: bus manager 0
firewire1: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
firewire1: bus manager 0
hdacc0: <Realtek ALC883 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC883 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC883 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa0
pcm1: <Realtek ALC883 (Front Analog)> at nid 27 and 25 on hdaa0
pcm2: <Realtek ALC883 (Rear Digital)> at nid 30 on hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen2.2: <Logitech> at usbus2
ums0: <Logitech USB-PS2 Optical Mouse, class 0/0, rev 2.00/11.10, addr 2> on usbus2
ums0: 3 buttons and [XYZ] coordinates ID=0
ada0 at ata3 bus 0 scbus1 target 0 lun 0
ada0: <SAMSUNG HD161HJ GF100-07> ATA-8cd0 at ata2 bus 0 scbus0 target 1 lun 0
cd0: <_NEC DVD_RW ND-3500AG 2.19> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [2295104 x 2048 byte records]
SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad6
ada1 at ata4 bus 0 scbus2 target 0 lun 0
ada1: <WDC WD30EZRX-00DC0B0 80.00A80> ATA-9 SATA 3.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada1: 2861588MB (5860533168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad8
ada2 at ata5 bus 0 scbus3 target 0 lun 0
ada2: <SAMSUNG HD160JJ ZM100-41> ATA-7 SATA 2.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada2: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad10
ada3 at ata6 bus 0 scbus4 target 0 lun 0
ada3: <WDC WD10EACS-00D6B1 01.01A01> ATA-8 SATA 2.x device
ada3: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada3: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad12
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3f 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
SMP: AP CPU #1 Launched!
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
Timecounter "TSC-low" frequency 14063266 Hz quality 1000
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 1 0 0 4 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3e 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3e 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3f 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3f 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3f 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3f 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3f 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 1 0 0 4 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3e 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3e 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3f 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3f 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
(cd0:ata2:0:1:0): READ(10). CDB: 28 0 0 23 5 3f 0 0 1 0
(cd0:ata2:0:1:0): CAM status: SCSI Status Error
(cd0:ata2:0:1:0): SCSI status: Check Condition
(cd0:ata2:0:1:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(cd0:ata2:0:1:0): Error 22, Unretryable error
(cd0:ata2:0:1:0): cddone: got error 0x16 back
Trying to mount root from ufs:/dev/ufsid/521a7a35f4c54939 [rw]...
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
|
