HDD - HDD труп?

HDD - HDD труп?

Makci501

Новый участник

Сообщения: 1
Благодарности: 0

Профиль | Отправить PM | Цитировать

Добрый день. Подскажите, пожалуйста, полный ли труп HDD на 500гиг..

Vicrotia

HDAT2

*******************************************************************************
HDAT2 v6.6 (c) 2019 CBL 16.05.2020 17:36:10
*******************************************************************************
Device data [ST9500325AS]
*******************************************************************************
-------------------------------------------------------------------------------
Source Cylinders Heads Sectors Total sectors Size
-------------------------------------------------------------------------------
ATA LBA28 16383 16 63 16,514,064 8.46 GB
ATA LBA48 0 0.00 KB
ATA CHS 16383 16 63 16,514,064 8.46 GB
(* = CHS parameters are not valid)
-------------------------------------------------------------------------------
SET MAX size READ ERROR n/a n/a
DCO MAX size FROZEN n/a n/a
-------------------------------------------------------------------------------
Device model [AHCI/SATA] ST9500325AS
Vendor Seagate
Translation/max. LBA mode LBA/48-bits
Logical sector size [b] 512
Physical sector size [b] 512
Detect mode AHCI
Removable device NO
-------------------------------------------------------------------------------
Identify Device data
-------------------------------------------------------------------------------
Integrity word (optional)
-> Signature: O.K. [read: A5h, calc: A5h]
-> Checksum : O.K. [read: A1h, calc: A1h]
ATA major version 01F0h
-> ATA/ATAPI 4 5 6 7 8
ATA minor version 0029h
-> ATA8-ACS rev.4
Transfer mode: max. supported Ultra DMA 6/ATA133
Transfer mode: selected Multi word DMA 2
Serial number 5VENRZDJ
Firmware D005
Cache 8.39 MB
-> Cache type: not specified
General configuration 0C5Ah = 00001100|01011010b
-> Protocol type: ATA
Specific configuration C837h
-> Device does not require SET FEATURES subcommand to spin-up after power-up
and IDENTIFY DEVICE response is complete.
Maximum queue depth (NCQ) 32
COMRESET result 0000h = 00000000|00000000b
Detected an 80-conductor cable NO
Multiword DMA transfer cycle time per word [ns]
-> Minimum: 120
-> Vendor's recommended: 120
Minimum PIO transfer cycle time [ns]
-> without IORDY flow control: 120
-> with IORDY flow control: 120
Security status 0000h = 00000000|00000000b
-> Security: not supported, disabled, not locked, not frozen
-> Security count expired: NO
-> Enhanced Security Erase: not supported
Master password identifier (Revision code) FFFEh
-> supported
Time for normal security erase unit 2 min.
Time for enhanced security erase unit not specified
Extended number of user addressable sectors reserved
-------------------------------------------------------------------------------
Capabilities
-> DMA supported
-> LBA supported
-> IORDY may be disabled
-> IORDY supported
-> Standby timer values are supported
-------------------------------------------------------------------------------
Command/Feature Sets supported ENABLED
-------------------------------------------------------------------------------
SMART feature set YES
Security feature set NO
Power management feature set YES
Write cache YES
Read cache (look-ahead) YES
Host Protected Area (HPA) feature set YES
WRITE BUFFER command YES
READ BUFFER command YES
NOP command YES
DOWNLOAD MICROCODE command YES
Advanced Power Management (APM) feature set YES
SET MAX security extension NO
Automatic Acoustic Management (AAM) feature set YES
48-bit address feature set YES
Device Configuration Overlay (DCO) feature set YES
FLUSH CACHE command YES
FLUSH CACHE EXT command YES
SMART error logging YES
SMART self-test YES
General Purpose Logging (GPL) feature set YES
World Wide Name (WWN) YES
IDLE IMMEDIATE with UNLOAD FEATURE YES
Write-Read-Verify feature set NO
WRITE UNCORRECTABLE EXT command YES
READ/WRITE LOG DMA EXT command YES
DOWNLOAD MICROCODE command with offsets (mode 3) YES
Long Logical Sector (LLS) feature set NO
Long Physical Sector (LPS) feature set NO
-------------------------------------------------------------------------------
Advanced Power Management (APM) level value 80h
Acoustic Management (AAM): vendors/current value D0h/D0h
Read/Write LONG: ECC bytes 4
Read/Write MULTIPLE: sectors per DRQ data block
-> Maximum: 16
-> Current: 16
-------------------------------------------------------------------------------
Streaming
-------------------------------------------------------------------------------
-> not supported
-------------------------------------------------------------------------------
Logical/Physical blocks
-------------------------------------------------------------------------------
Logical/Physical sector size word [not valid] 0000h
Logical sector size [b] 512
Logical sector zero offset not valid
Long Physical Sector (LPS) Alignment Error reporting
-> not supported
-------------------------------------------------------------------------------
Inter-seek delay for acoustic testing [microsec] 0
Command Completion Time Limit (CCTL) [ms] 0
-> TLC feature set is not supported.
-------------------------------------------------------------------------------
World Wide Name (64-bit) 5000|C500|456B|6C29h
Network Address Authority (NAA)
-> IEEE Registered name
IEEE OUI 00|0C50h
-> Seagate
Unique ID 0000|456B|6C29h
-------------------------------------------------------------------------------
CFA power mode not supported
Current media serial number
-> not supported
Write-Read-Verify feature set
-> Current mode: 0 (always enabled)
-> Sector Count Mode 2: 0
-> Sector Count Mode 3: 0
Free-fall control sensitivity not supported
Number of data blocks per DOWNLOAD MICROCODE mode 3
-> The DOWNLOAD MICROCODE command supports the offset transfer method.
-> Minimum: no limit = 0 bytes
-> Maximum: no limit = 0 bytes
Transport major revision number: support
-> Serial: SATA rev.2.6
Transport minor revision number not reported
SMART Command Transport (SCT) command set
-> SCT supported
-> Long Sector Access (Read/Write Long)
-> Write Same
-> Error Recovery Control
-> Feature Control
-> Data Tables
-> vendor specific
Trusted Computing feature (TCG) not valid
Nominal media rotation rate [rpm] 5400
Device Form Factor not reported
DATA SET MANAGEMENT
-> TRIM: not supported
DATA SET MANAGEMENT: max. number of blocks of LBA range entries
-> not supported
Additional Product Identifier not supported
-------------------------------------------------------------------------------
NV Cache
-------------------------------------------------------------------------------
-> not supported
-------------------------------------------------------------------------------
SATA capabilities supported
-------------------------------------------------------------------------------
1.5 Gb/s (SATA GEN1)
3.0 Gb/s (SATA GEN2)
Native Command Queuing (NCQ)
Host Initiated Link Power Management (HIPM)
Phy Event Counters log
Unload while NCQ commands are outstanding
Current SATA speed: not supported
-------------------------------------------------------------------------------
SATA features supported ENABLED
-------------------------------------------------------------------------------
Device Initiated Link Power Management (DIPM) NO
Software Settings Preservation (SSP) YES
-------------------------------------------------------------------------------
Vendor specific
-------------------------------------------------------------------------------
DriveTrust 0008h = 00000000|00001000b
-> Supported: NO
-> Enabled : NO
Full Disc Encryption 0000h = 00000000|00000000b
-> Supported: NO
-------------------------------------------------------------------------------
Extended INT13h
-------------------------------------------------------------------------------
Extended INT13h support NO
INT13h Identify Device support not detected
-------------------------------------------------------------------------------

Со слов жены, ноут начал тормозить и решила перезагрузить его. При завершении работы висел около 10 минут, и хардонула...
HDD перестал определяется в BIOS, но его видно в Windows в Управлении дисков как "Не проинициализирован" и еще в некоторых программах с объемом 0
По звуку слышно что раскручивается и,вроде, считывает что-то.
На другом ноуте такие же симптомы.
Ранее были сильные удары..
Информация не важна (восстановил 400гиг фото с бекапов)
В этом проблема?
ATA LBA48 0 0.00 KB
и
SET MAX size READ ERROR n/a n/a

Спасибо!

Отправлено: 16:06, 17-05-2020

AntoshaKazz94

Новый участник

Сообщения: 18
Благодарности: 0

Профиль | Отправить PM | Цитировать

Если упал - то да... И только выбрасывать...

Отправлено: 18:44, 17-05-2020 | #2

Для отключения данного рекламного блока вам необходимо зарегистрироваться или войти с учетной записью социальной сети.

Если же вы забыли свой пароль на форуме, то воспользуйтесь данной ссылкой для восстановления пароля.