Debian/Ubuntu - SAMBA не пускает с другой сети

Debian/Ubuntu - SAMBA не пускает с другой сети

Zoldan

Новый участник

Сообщения: 22
Благодарности: 0

Доброго времнени суток.
Беда! Win домен, сеть порядка 300 машин winXP и 7. Сеть разбита на несколько сегментов, соединенных между собой по VPN. Почти в каждом сегменте есть свой домен контроллер, привязанный к сайту сегмента сети.
В этом всем безобразии есть Linux сервер занимающийся приемом факсов. Принятые факсы он складывает в расшаренную SAMB'ой шару.
Беда вот в чем. Если пользователь заходит с тойже сети в которой находится SAMBA, то все ок, а если с любой другой, то может пройти только пару вложенных папок, а при заходе в папку с факсами exsplorer благополучно вешается, и в конце коцев выдает сообщение что доступ не может быть получен.... и ниже "не найдено имя группы"
Linux машина в домене, группы и пользователей получает вроде нормально
[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = RDS
realm = RDS.LAN
local master = no
preferred master = no

# server string is the equivalent of the NT Description field
server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
# wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
; name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
; interfaces = 127.0.0.0/8 eth0
hosts allow = 192.168.

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself. However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
; bind interfaces only = yes

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
# syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
security = ADS
auth methods = winbind
password server = dc-01.rds.lan, dc-02.rds.lan, dc-03.rds.lan, dc-05.rds.lan

# You may wish to use password encryption. See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
encrypt passwords = true
dns proxy = no
socket options = TCP_NODELAY

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.
passdb backend = tdbsam

obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
; domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
; logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
# logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
; logon drive = H:
# logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe. The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe.
# The following assumes a "machines" group exists on the system
; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
# load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
; printing = bsd
; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
; printing = cups
; printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
# SO_RCVBUF=8192 SO_SNDBUF=8192
# socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
domain master = no
local master = no
preferred master = no
os level = 0
domain logons = no

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
idmap uid = 10000-40000
idmap gid = 10000-40000
winbind use default domain = yes
winbind refresh tickets = yes
case sensitive = No

; template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
winbind enum groups = yes
winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
; usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
# usershare allow
# guestsкуакrefresh

# guest account = guest

#

[Входящие факсы]
browseable = yes
path = /home/tux/FAX/incoming
guest ok = Yes
valid users = "@RDS\Пользователи домена"
read list = "@RDS\Пользователи домена"
write list = "@RDS\FAX_RW"
create mask = 664
directory mask = 664
force group = "@RDS\FAX_RW"
readonly = No

[Share]
browseable = yes
#valid users = "@RDS\Администраторы домена"
#write list = "@RDS\Администраторы домена"
#read list = "@RDS\Администраторы домена"
path = /home/tux/share
readonly = no
directory mask = 666
guest ok = Yes

[TEST]
browseable = yes
path = /home/tux/TEST
readonly = no
guest ok = yes

Расшаренна папка incoming, в ней есть папка 2012->Февраль->тут файлы с факсами *.tif Нормально доходит до папки "Январь", а при входе в нее все виснит
Помогите, где копать?
Samba 3.4.7, ubuntu 10.04 server
Вообщем заметил такую странность, если папка пустая, то открывается, если там 4-10 файлов (на разных компах проявляется по разному), то не пускает...

Отправлено: 06:43, 29-02-2012

Zoldan

Новый участник

Сообщения: 22
Благодарности: 0

Профиль | Отправить PM | Цитировать

вот что в логе:
[2012/02/29 09:17:29, 1] smbd/service.c:1063(make_connection_snum)
dc-02 (192.168.15.7) connect to service Входящие факсы initially as user RDS\druide (uid=10500, gid=10261) (pid 6098)
[2012/02/29 09:17:59, 1] smbd/service.c:1240(close_cnum)
dc-02 (192.168.15.7) closed connection to service Входящие факсы
[2012/02/29 09:17:59, 0] lib/util_sock.c:539(read_fd_with_timeout)
[2012/02/29 09:17:59, 0] lib/util_sock.c:1498(get_peer_addr_internal)
getpeername failed. Error was Transport endpoint is not connected
read_fd_with_timeout: client 0.0.0.0 read error = Connection reset by peer.
[2012/02/29 09:18:11, 1] smbd/service.c:1063(make_connection_snum)

Отправлено: 09:38, 29-02-2012 | #2

Для отключения данного рекламного блока вам необходимо зарегистрироваться или войти с учетной записью социальной сети.

Если же вы забыли свой пароль на форуме, то воспользуйтесь данной ссылкой для восстановления пароля.