Новости
Видео
Microsoft
Windows 10
Железо
Программы
Форум

Имя пользователя:
Пароль:  
Помощь | Регистрация | Забыли пароль?  | Правила  

Компьютерный форум OSzone.net » Linux и FreeBSD » Общий по FreeBSD » pppd dial-up проблемы

< Предыдущая 1 2
Ответить
Настройки темы
pppd dial-up проблемы
A N D


Сообщения: n/a

Профиль | Цитировать

Привет всем! Господа у меня проблема с которой я вожусь уже больше недели и никак...
у меня freebsd 4.9 внешний модем, когда додзванивается после конекта выдает скорость подключения. Потом викидывает приблизительно такое:
~^} и т.д.
Провайдер использует рар.

pppd.log:

Mar 30 07:44:30 death pppd[473]: pppd 2.3.5 started by taoo, uid 0
Mar 30 07:45:01 death pppd[473]: Serial connection established.
Mar 30 07:45:02 death pppd[473]: Using interface ppp0
Mar 30 07:45:02 death pppd[473]: Connect: ppp0 <--> /dev/cuaa1
Mar 30 07:45:02 death pppd[473]: sent [LCP ConfReq id=0x1 <auth pap> <magic 0x2b11b353> <pcomp> <accomp>]
Mar 30 07:45:02 death pppd[473]: rcvd [LCP ConfAck id=0x1 <auth pap> <magic 0x2b11b353> <pcomp> <accomp>]
Mar 30 07:45:03 death pppd[473]: rcvd [LCP ConfReq id=0x4c <asyncmap 0xa0000> <auth pap> <magic 0x6d51b226> <pcomp> <accomp>]
Mar 30 07:45:03 death pppd[473]: sent [LCP ConfAck id=0x4c <asyncmap 0xa0000> <auth pap> <magic 0x6d51b226> <pcomp> <accomp>]
Mar 30 07:45:03 death pppd[473]: sent [PAP AuthReq id=0x1 user="my_user" password="my_pass"]
Mar 30 07:45:03 death pppd[473]: rcvd [LCP TermReq id=0x4d]
Mar 30 07:45:03 death pppd[473]: LCP terminated by peer
Mar 30 07:45:03 death pppd[473]: sent [LCP TermAck id=0x4d]
Mar 30 07:45:06 death pppd[473]: Connection terminated, connected for 1 minutes
Mar 30 07:45:07 death pppd[473]: Exit.

options:

/dev/cuaa1
115200
modem
crtscts
connect '/usr/bin/chat -V -f /etc/ppp/script'
noipdefault
debug
nodetach
defaultroute
require-pap
refuse-chap
user my_user

script:

ABORT BUSY
ABORT 'NO CARRIER'
ABORT 'NO ANSWER'
ABORT 'NO DIALTONE'
TIMEOUT 5
"" AT
OK ATDP525252
TIMEOUT 125
CONNECT ""
TIMEOUT 5
"}" ""

pap-secrets:

my_user * my_pass

Так где я "наломал дров". Зарание благодарен за ответ!

Отправлено: 08:07, 31-03-2004

 
A N D


Сообщения: n/a

Профиль | Цитировать

Я пробЫвал на обычный номер дзвонить додзвон идет но потом пишет что connection script failed. Пробывал nobsdcomp так же ничего нового. А вот на счет настроек не пробЫвал. Где можно про них начитатся? Желательно на руском.

Отправлено: 08:51, 05-04-2004 | #11



Для отключения данного рекламного блока вам необходимо зарегистрироваться или войти с учетной записью социальной сети.

Если же вы забыли свой пароль на форуме, то воспользуйтесь данной ссылкой для восстановления пароля.


Аватара для Belansky

Юниксоид


Сообщения: 3001
Благодарности: 45

Профиль | Отправить PM | Цитировать

Я у себя дозвон в консоли настраивал полностью следую указаниям этой статьи http://bsd.opennet.ru/base/modem/fre...ialup.txt.html. Плюсом к тому пару, тройку скриптов написал для вящего удобства процесса.

-------
Косово je Србиjа!

Отправлено: 20:00, 05-04-2004 | #12


Аватара для Guest

Guest

Профиль | Цитировать

У меня почти похожая  проблема

USER PPP Я НАСТРОИЛ И ОН РАБОТАЕТ


а вот pppd не получается

только у меня дозвон проходит
а потом в течении 5-10 секунд появляется:

Sep 13 09:09:46  pppd[510]: Connect script faild

у провайдера chap-аунтификация

вот мои конфиг файлы
/etc/ppp/options

/dev/cuaa0      115200
crtscts
modem
connect '/usr/bin/chat -f /etc/ppp/chat.script'
noipdefault
silent
defaultroute

/etc/ppp/chat.script

ABORT BUSY ABORT 'NO CARRIER' "" AT OK ATDP2416444 CONNECT "" TIMEOUT 10 ogin: user TIMEOUT 5 sword: 12345

пароль и логин у меня точно правильный

пробЫвал выяснить в чем дело с помощью

ppp on localhost> set device /dev/cuaa0
ppp on localhost> set speed 115200
ppp on localhost> term
deflink: Entering terminal mode on /dev/cuaa0
type '~h' for help
at
OK
atdp2416444
появляется
+MCR:V34
+MBR:28800
+ER:LAPM
+DR:V42B
CONNECT 28800

проходит минута или больше появляется NO CARRIER

а если до ppp on localhost> term ввести
ppp on localhost> set authname user
ppp on localhost> set authket  1234

то появляется тоже самое только
заместь +DR:V42B +DR:NONE

в option добавлял
nodetach
require-chap

не чего не помогло
у провайдера спрашивал он сказал не знает

в чем проблема?
Почему user ppp работает а pppd не работает
может я делаю что то не так

freeBSD 5.2
модем внешний

pppd.log я не нашел

ppp.log


Sep 15 20:50:54  ppp[553]: Phase: Using interface: tun0
Sep 15 20:50:54  ppp[553]: Phase: deflink: Created in closed state
Sep 15 20:50:54  ppp[553]: tun0: Command: default: ident user-ppp VERSION (built COMPILATIONDATE)
Sep 15 20:50:54  ppp[553]: tun0: Command: default: set device /dev/cuaa0
Sep 15 20:50:54  ppp[553]: tun0: Command: default: set speed 115200
Sep 15 20:50:54  ppp[553]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER TIMEOUT 5            "" AT OK-AT-OK ATE1Q0 OK \dATDP\T TIMEOUT 40 CONNECT
Sep 15 20:50:54  ppp[553]: tun0: Command: default: set timeout 180
Sep 15 20:50:54  ppp[553]: tun0: Command: default: enable dns
Sep 15 20:50:54  ppp[553]: tun0: Command: papchap: set phone 2416444
Sep 15 20:50:54  ppp[553]: tun0: Command: papchap: set authname krol
Sep 15 20:50:54  ppp[553]: tun0: Command: papchap: set authkey ********
Sep 15 20:50:54  ppp[553]: tun0: Command: papchap: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Sep 15 20:50:54  ppp[553]: tun0: Command: papchap: add default HISADDR
Sep 15 20:50:54  ppp[554]: tun0: Phase: PPP Started (background mode).
Sep 15 20:50:54  ppp[554]: tun0: Phase: bundle: Establish
Sep 15 20:50:54  ppp[554]: tun0: Phase: deflink: closed -> opening
Sep 15 20:50:54  ppp[554]: tun0: Phase: deflink: Connected!
Sep 15 20:50:54  ppp[554]: tun0: Phase: deflink: opening -> dial
Sep 15 20:50:54  ppp[554]: tun0: Chat: Phone: 2416444
Sep 15 20:50:54  ppp[554]: tun0: Chat: deflink: Dial attempt 1 of 1
Sep 15 20:50:54  ppp[554]: tun0: Chat: Send: AT^M
Sep 15 20:50:54  ppp[554]: tun0: Chat: Expect(5): OK
Sep 15 20:50:54  ppp[554]: tun0: Chat: Received: AT^M^M
Sep 15 20:50:54  ppp[554]: tun0: Chat: Received: OK^M
Sep 15 20:50:54  ppp[554]: tun0: Chat: Send: ATE1Q0^M
Sep 15 20:50:54  ppp[554]: tun0: Chat: Expect(5): OK
Sep 15 20:50:54  ppp[554]: tun0: Chat: Received: ATE1Q0^M^M
Sep 15 20:50:54  ppp[554]: tun0: Chat: Received: OK^M
Sep 15 20:50:54  ppp[554]: tun0: Chat: Send: ATDP2416444^M
Sep 15 20:50:56  ppp[554]: tun0: Chat: Expect(40): CONNECT
Sep 15 20:51:30  ppp[554]: tun0: Chat: Received: ATDP2416444^M^M
Sep 15 20:51:30  ppp[554]: tun0: Chat: Received: +MCR: V34^M
Sep 15 20:51:30  ppp[554]: tun0: Chat: Received: ^M
Sep 15 20:51:30  ppp[554]: tun0: Chat: Received: +MRR: 26400^M
Sep 15 20:51:31  ppp[554]: tun0: Chat: Received: ^M
Sep 15 20:51:31  ppp[554]: tun0: Chat: Received: +ER: LAPM^M
Sep 15 20:51:31  ppp[554]: tun0: Chat: Received: ^M
Sep 15 20:51:31  ppp[554]: tun0: Chat: Received: +DR: V42B^M
Sep 15 20:51:31  ppp[554]: tun0: Chat: Received: ^M
Sep 15 20:51:31  ppp[554]: tun0: Chat: Received: CONNECT 26400^M
Sep 15 20:51:31  ppp[554]: tun0: Phase: deflink: dial -> carrier
Sep 15 20:51:32  ppp[554]: tun0: Phase: deflink: /dev/cuaa0: CD detected
Sep 15 20:51:32  ppp[554]: tun0: Phase: deflink: carrier -> login
Sep 15 20:51:32  ppp[554]: tun0: Phase: deflink: login -> lcp
Sep 15 20:51:32  ppp[554]: tun0: LCP: FSM: Using "deflink" as a transport
Sep 15 20:51:32  ppp[554]: tun0: LCP: deflink: State change Initial --> Closed
Sep 15 20:51:32  ppp[554]: tun0: LCP: deflink: State change Closed --> Stopped
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: LayerStart
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped
Sep 15 20:51:33  ppp[554]: tun0: LCP:  ACFCOMP[2]
Sep 15 20:51:33  ppp[554]: tun0: LCP:  PROTOCOMP[2]
Sep 15 20:51:33  ppp[554]: tun0: LCP:  ACCMAP[6] 0x00000000
Sep 15 20:51:33  ppp[554]: tun0: LCP:  MRU[4] 1500
Sep 15 20:51:33  ppp[554]: tun0: LCP:  MAGICNUM[6] 0xceaa5a9e
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: State change Stopped --> Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: RecvConfigReq(0) state = Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: LCP:  ACCMAP[6] 0x00000000
Sep 15 20:51:33  ppp[554]: tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x80)
Sep 15 20:51:33  ppp[554]: tun0: LCP:  MAGICNUM[6] 0x00006cb1
Sep 15 20:51:33  ppp[554]: tun0: LCP:  PROTOCOMP[2]
Sep 15 20:51:33  ppp[554]: tun0: LCP:  ACFCOMP[2]
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: SendConfigAck(0) state = Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: LCP:  ACCMAP[6] 0x00000000
Sep 15 20:51:33  ppp[554]: tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x80)
Sep 15 20:51:33  ppp[554]: tun0: LCP:  MAGICNUM[6] 0x00006cb1
Sep 15 20:51:33  ppp[554]: tun0: LCP:  PROTOCOMP[2]
Sep 15 20:51:33  ppp[554]: tun0: LCP:  ACFCOMP[2]
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: State change Req-Sent --> Ack-Sent
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: RecvConfigAck(1) state = Ack-Sent
Sep 15 20:51:33  ppp[554]: tun0: LCP:  ACFCOMP[2]
Sep 15 20:51:33  ppp[554]: tun0: LCP:  PROTOCOMP[2]
Sep 15 20:51:33  ppp[554]: tun0: LCP:  ACCMAP[6] 0x00000000
Sep 15 20:51:33  ppp[554]: tun0: LCP:  MRU[4] 1500
Sep 15 20:51:33  ppp[554]: tun0: LCP:  MAGICNUM[6] 0xceaa5a9e
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: State change Ack-Sent --> Opened
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: LayerUp
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: SendIdent(0) state = Opened
Sep 15 20:51:33  ppp[554]: tun0: LCP:  MAGICNUM ceaa5a9e
Sep 15 20:51:33  ppp[554]: tun0: LCP:  TEXT user-ppp 3.1 (built Jan 11 2004)
Sep 15 20:51:33  ppp[554]: tun0: Phase: bundle: Authenticate
Sep 15 20:51:33  ppp[554]: tun0: Phase: deflink: his = CHAP 0x80, mine = none
Sep 15 20:51:33  ppp[554]: tun0: Phase: Chap Input: CHALLENGE (8 bytes)
Sep 15 20:51:33  ppp[554]: tun0: Phase: Chap Output: RESPONSE (krol)
Sep 15 20:51:33  ppp[554]: tun0: Phase: Chap Input: SUCCESS
Sep 15 20:51:33  ppp[554]: tun0: IPCP: Using trigger address 0.0.0.0
Sep 15 20:51:33  ppp[554]: tun0: CCP: FSM: Using "deflink" as a transport
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: State change Initial --> Closed
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: LayerStart.
Sep 15 20:51:33  ppp[554]: tun0: CCP: MPPE: Not usable without CHAP81
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: SendConfigReq(1) state = Closed
Sep 15 20:51:33  ppp[554]: tun0: CCP:  DEFLATE[4] win 15
Sep 15 20:51:33  ppp[554]: tun0: CCP:  PRED1[2]  
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: State change Closed --> Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: Phase: deflink: lcp -> open
Sep 15 20:51:33  ppp[554]: tun0: Phase: bundle: Network
Sep 15 20:51:33  ppp[554]: tun0: IPCP: FSM: Using "deflink" as a transport
Sep 15 20:51:33  ppp[554]: tun0: IPCP: deflink: State change Initial --> Closed
Sep 15 20:51:33  ppp[554]: tun0: IPCP: deflink: LayerStart.
Sep 15 20:51:33  ppp[554]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  PRIDNS[6] 195.140.160.2
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  SECDNS[6] 255.255.255.255
Sep 15 20:51:33  ppp[554]: tun0: IPCP: deflink: State change Closed --> Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: RecvConfigReq(1) state = Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: CCP:  MPPE[6] value 0x00000001 (0 bits, stateful, compressed)
Sep 15 20:51:33  ppp[554]: tun0: CCP: MPPE: Not usable without CHAP81
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: SendConfigRej(1) state = Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: CCP:  MPPE[6] value 0x00000001 (0 bits, stateful, compressed)
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: SendIdent(1) state = Opened
Sep 15 20:51:33  ppp[554]: tun0: LCP:  MAGICNUM ceaa5a9e
Sep 15 20:51:33  ppp[554]: tun0: LCP:  TEXT user-ppp 3.1 (built Jan 11 2004)
Sep 15 20:51:33  ppp[554]: tun0: IPCP: deflink: RecvConfigReq(2) state = Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  IPADDR[6] 195.140.160.32
Sep 15 20:51:33  ppp[554]: tun0: IPCP: deflink: SendConfigAck(2) state = Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  IPADDR[6] 195.140.160.32
Sep 15 20:51:33  ppp[554]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: RecvConfigRej(1) state = Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: SendIdent(2) state = Opened
Sep 15 20:51:33  ppp[554]: tun0: LCP:  MAGICNUM ceaa5a9e
Sep 15 20:51:33  ppp[554]: tun0: LCP:  TEXT user-ppp 3.1 (built Jan 11 2004)
Sep 15 20:51:33  ppp[554]: tun0: CCP:  DEFLATE[4] win 15
Sep 15 20:51:33  ppp[554]: tun0: CCP:  PRED1[2]  
Sep 15 20:51:33  ppp[554]: tun0: CCP: MPPE: Not usable without CHAP81
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: SendConfigReq(2) state = Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: CCP:   [EMPTY]
Sep 15 20:51:33  ppp[554]: tun0: IPCP: deflink: RecvConfigNak(1) state = Ack-Sent
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  IPADDR[6] 195.140.160.35
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  IPADDR[6] changing address: 0.0.0.0  --> 195.140.160.35
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  PRIDNS[6] 195.140.160.1
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  SECDNS[6] 195.140.160.2
Sep 15 20:51:33  ppp[554]: tun0: IPCP: Primary nameserver set to 195.140.160.1
Sep 15 20:51:33  ppp[554]: tun0: IPCP: Secondary nameserver set to 195.140.160.2
Sep 15 20:51:33  ppp[554]: tun0: IPCP: deflink: SendConfigReq(2) state = Ack-Sent
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  IPADDR[6] 195.140.160.35
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  PRIDNS[6] 195.140.160.1
Sep 15 20:51:33  ppp[554]: tun0: IPCP:  SECDNS[6] 195.140.160.2
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: RecvProtocolRej(3) state = Opened
Sep 15 20:51:33  ppp[554]: tun0: LCP: deflink: -- Protocol 0x8057 (Internet Protocol V6 Control Protocol) was rejected!
Sep 15 20:51:33  ppp[554]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: RecvTerminateReq(4) state = Req-Sent
Sep 15 20:51:33  ppp[554]: tun0: CCP: deflink: SendTerminateAck(4) state = Req-Sent
Sep 15 20:51:34  ppp[554]: tun0: IPCP: deflink: RecvConfigAck(2) state = Ack-Sent
Sep 15 20:51:34  ppp[554]: tun0: IPCP:  IPADDR[6] 195.140.160.35
Sep 15 20:51:34  ppp[554]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Sep 15 20:51:34  ppp[554]: tun0: IPCP:  PRIDNS[6] 195.140.160.1
Sep 15 20:51:34  ppp[554]: tun0: IPCP:  SECDNS[6] 195.140.160.2
Sep 15 20:51:34  ppp[554]: tun0: IPCP: deflink: State change Ack-Sent --> Opened
Sep 15 20:51:34  ppp[554]: tun0: IPCP: deflink: LayerUp.
Sep 15 20:51:34  ppp[554]: tun0: IPCP: myaddr 195.140.160.35 hisaddr = 195.140.160.32
Sep 15 20:51:34  ppp[553]: tun0: Phase: Parent: PPP enabled
Sep 15 20:51:34  ppp[554]: tun0: Chat: Parent notified of success
Sep 15 20:51:34  ppp[554]: tun0: LCP: deflink: RecvProtocolRej(5) state = Opened
Sep 15 20:51:34  ppp[554]: tun0: LCP: deflink: -- Protocol 0x8057 (Internet Protocol V6 Control Protocol) was rejected!
Sep 15 20:51:34  ppp[554]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
Sep 15 20:51:37  ppp[554]: tun0: CCP: MPPE: Not usable without CHAP81
Sep 15 20:51:37  ppp[554]: tun0: CCP: deflink: SendConfigReq(2) state = Req-Sent
Sep 15 20:51:37  ppp[554]: tun0: CCP:   [EMPTY]
Sep 15 20:51:37  ppp[554]: tun0: CCP: deflink: RecvTerminateAck(2) state = Req-Sent
Sep 15 20:51:37  ppp[554]: tun0: LCP: deflink: RecvProtocolRej(6) state = Opened
Sep 15 20:51:37  ppp[554]: tun0: LCP: deflink: -- Protocol 0x8057 (Internet Protocol V6 Control Protocol) was rejected!
Sep 15 20:51:37  ppp[554]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
Sep 15 20:51:40  ppp[554]: tun0: CCP: MPPE: Not usable without CHAP81
Sep 15 20:51:40  ppp[554]: tun0: CCP: deflink: SendConfigReq(3) state = Req-Sent
Sep 15 20:51:40  ppp[554]: tun0: CCP:   [EMPTY]
Sep 15 20:51:40  ppp[554]: tun0: CCP: deflink: RecvTerminateAck(3) state = Req-Sent
Sep 15 20:51:40  ppp[554]: tun0: LCP: deflink: RecvProtocolRej(7) state = Opened
Sep 15 20:51:40  ppp[554]: tun0: LCP: deflink: -- Protocol 0x8057 (Internet Protocol V6 Control Protocol) was rejected!
Sep 15 20:51:40  ppp[554]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
Sep 15 20:51:41  ppp[554]: tun0: Phase: Signal 15, terminate.
Sep 15 20:51:41  ppp[554]: tun0: IPCP: deflink: LayerDown: 195.140.160.35
Sep 15 20:51:41  ppp[554]: tun0: IPCP: Using trigger address 0.0.0.0
Sep 15 20:51:41  ppp[554]: tun0: IPCP: deflink: SendTerminateReq(3) state = Opened
Sep 15 20:51:41  ppp[554]: tun0: IPCP: deflink: State change Opened --> Closing
Sep 15 20:51:41  ppp[554]: tun0: IPCP: deflink: RecvTerminateAck(3) state = Closing
Sep 15 20:51:41  ppp[554]: tun0: IPCP: deflink: LayerFinish.
Sep 15 20:51:41  ppp[554]: tun0: IPCP: Connect time: 8 secs: 0 octets in, 0 octets out
Sep 15 20:51:41  ppp[554]: tun0: IPCP: 0 packets in, 0 packets out
Sep 15 20:51:41  ppp[554]: tun0: IPCP:  total 0 bytes/sec, peak 0 bytes/sec on Wed Sep 15 20:51:33 2004
Sep 15 20:51:41  ppp[554]: tun0: IPCP: deflink: State change Closing --> Closed
Sep 15 20:51:43  ppp[554]: tun0: CCP: MPPE: Not usable without CHAP81
Sep 15 20:51:43  ppp[554]: tun0: CCP: deflink: SendConfigReq(4) state = Req-Sent
Sep 15 20:51:43  ppp[554]: tun0: CCP:   [EMPTY]
Sep 15 20:51:43  ppp[554]: tun0: CCP: deflink: RecvTerminateAck(4) state = Req-Sent
Sep 15 20:51:43  ppp[554]: tun0: LCP: deflink: RecvProtocolRej(8) state = Opened
Sep 15 20:51:43  ppp[554]: tun0: LCP: deflink: -- Protocol 0x8057 (Internet Protocol V6 Control Protocol) was rejected!
Sep 15 20:51:43  ppp[554]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
Sep 15 20:51:46  ppp[554]: tun0: CCP: MPPE: Not usable without CHAP81
Sep 15 20:51:46  ppp[554]: tun0: CCP: deflink: SendConfigReq(5) state = Req-Sent
Sep 15 20:51:46  ppp[554]: tun0: CCP:   [EMPTY]
Sep 15 20:51:46  ppp[554]: tun0: CCP: deflink: RecvTerminateAck(5) state = Req-Sent
Sep 15 20:51:46  ppp[554]: tun0: LCP: deflink: RecvProtocolRej(9) state = Opened
Sep 15 20:51:46  ppp[554]: tun0: LCP: deflink: -- Protocol 0x8057 (Internet Protocol V6 Control Protocol) was rejected!
Sep 15 20:51:46  ppp[554]: tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
Sep 15 20:51:49  ppp[554]: tun0: CCP: deflink: LayerFinish.
Sep 15 20:51:49  ppp[554]: tun0: CCP: deflink: State change Req-Sent --> Stopped
Sep 15 20:51:49  ppp[554]: tun0: Phase: bundle: Terminate
Sep 15 20:51:49  ppp[554]: tun0: CCP: deflink: State change Stopped --> Closed
Sep 15 20:51:49  ppp[554]: tun0: CCP: deflink: State change Closed --> Initial
Sep 15 20:51:49  ppp[554]: tun0: LCP: deflink: LayerDown
Sep 15 20:51:49  ppp[554]: tun0: LCP: deflink: SendTerminateReq(2) state = Opened
Sep 15 20:51:49  ppp[554]: tun0: LCP: deflink: State change Opened --> Closing
Sep 15 20:51:49  ppp[554]: tun0: Phase: deflink: open -> lcp
Sep 15 20:51:49  ppp[554]: tun0: IPCP: deflink: State change Closed --> Initial
Sep 15 20:51:49  ppp[554]: tun0: LCP: deflink: RecvTerminateAck(2) state = Closing
Sep 15 20:51:49  ppp[554]: tun0: LCP: deflink: LayerFinish
Sep 15 20:51:49  ppp[554]: tun0: LCP: deflink: State change Closing --> Closed
Sep 15 20:51:49  ppp[554]: tun0: LCP: deflink: State change Closed --> Initial
Sep 15 20:51:49  ppp[554]: tun0: Phase: deflink: Disconnected!
Sep 15 20:51:49  ppp[554]: tun0: Phase: deflink: lcp -> logout
Sep 15 20:51:49  ppp[554]: tun0: Phase: deflink: logout -> hangup
Sep 15 20:51:49  ppp[554]: tun0: Phase: deflink: Disconnected!
Sep 15 20:51:49  ppp[554]: tun0: Phase: deflink: Connect time: 55 secs: 439 octets in, 609 octets out
Sep 15 20:51:49  ppp[554]: tun0: Phase: deflink: 15 packets in, 25 packets out
Sep 15 20:51:49  ppp[554]: tun0: Phase:  total 19 bytes/sec, peak 170 bytes/sec on Wed Sep 15 20:51:37 2004
Sep 15 20:51:49  ppp[554]: tun0: Phase: deflink: hangup -> closed
Sep 15 20:51:49  ppp[554]: tun0: Phase: bundle: Dead
Sep 15 20:51:49  ppp[554]: tun0: Phase: PPP Terminated (normal).


заранее большое спасибо

Отправлено: 22:13, 15-09-2004 | #13

< Предыдущая 1 2


Компьютерный форум OSzone.net » Linux и FreeBSD » Общий по FreeBSD » pppd dial-up проблемы

Участник сейчас на форуме Участник сейчас на форуме Участник вне форума Участник вне форума Автор темы Автор темы Шапка темы Сообщение прикреплено

Похожие темы
Название темы Автор Информация о форуме Ответов Последнее сообщение
Dial-Up - Dial-Up =>Dial-Up+ADSL=Internet Sternwal Сетевые технологии 3 15-03-2010 11:00
Интернет - Проблемы с Dial-up'ом. aval12 Microsoft Windows Vista 1 12-03-2009 01:19
Dial-Up - Проблемы с Dial-Up Olg2000 Сетевые технологии 3 18-04-2008 11:30
Mgetty и pppd (Dial-in) antonku Программное обеспечение Linux и FreeBSD 12 25-05-2005 20:41
Проблемы с pppd Guest Общий по Linux 11 11-08-2004 10:08


« Предыдущая тема | Следующая тема »


 
Переход