[JeweL]

пробуй играть музыку через mpg123 file.mp3
если звука не будет, посмотри есть ли устройства /dev/dsp и /dev/mixer. сделай им chmod 666. через aumix включи каналы master и pcm

[pvit]

пишет что нет такого девайса
Can't open default sound device

[ruslandh]

А что у Вас прописано в /etc/modules.conf ?

[pvit]

вот мой /etc/modules.conf

### This file is automatically generated by update-modules"
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner


### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off# Unix
# alias net-pf-2 off# IPv4
# alias net-pf-3 off# Amateur Radio AX.25
# alias net-pf-4 off# IPX
# alias net-pf-5 off# DDP / appletalk
# alias net-pf-6 off# Amateur Radio NET/ROM
# alias net-pf-9 off# X.25
# alias net-pf-10 off# IPv6
# alias net-pf-11 off# ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off# Acorn Econet

alias char-major-10-175agpgart
alias char-major-10-200tun
alias char-major-81bttv
alias char-major-108ppp_generic
alias /dev/pppppp_generic
alias tty-ldisc-3ppp_async
alias tty-ldisc-14ppp_synctty
alias ppp-compress-21bsd_comp
alias ppp-compress-24ppp_deflate
alias ppp-compress-26ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0loop_gen
alias loop-xfer-3loop_fish2
alias loop-xfer-gen-10loop_gen
alias cipher-2des
alias cipher-3fish2
alias cipher-4blowfish
alias cipher-6idea
alias cipher-7serp6f
alias cipher-8mars6
alias cipher-11rc62
alias cipher-15dfc2
alias cipher-16rijndael
alias cipher-17rc5


### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/alsa-path
# Debian ALSA modules path
# Do not edit this unless you understand what you're doing.
path=/lib/modules/`uname -r`/alsa

### update-modules: end processing /etc/modutils/alsa-path

### update-modules: start processing /etc/modutils/lvm-common
# The Logical Volume Manager uses these block and char numbers
alias block-major-58 lvm-mod
alias char-major-109 lvm-mod

### update-modules: end processing /etc/modutils/lvm-common

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the once that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp * * * * *ppp_generic
alias char-major-108 * *ppp_generic
alias tty-ldisc-3 * * * ppp_async *
alias tty-ldisc-14 * * *ppp_synctty
alias ppp-compress-21 * bsd_comp *
alias ppp-compress-24 * ppp_deflate
alias ppp-compress-26 * ppp_deflate

### update-modules: end processing /etc/modutils/ppp

### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload"
#
alias /dev/tts * * * * *serial
alias /dev/tts/0 * * * *serial
alias /dev/tts/1 * * * *serial
alias /dev/tts/2 * * * *serial
alias /dev/tts/3 * * * *serial
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave *> /dev/null 2> /dev/null

### update-modules: end processing /etc/modutils/setserial

### update-modules: start processing /etc/modutils/arch/i386
alias parport_lowlevel parport_pc
alias char-major-10-144 nvram
alias binfmt-0064 binfmt_aout
alias char-major-10-135 rtc

### update-modules: end processing /etc/modutils/arch/i386

[ruslandh]

Может я ошибаюсь, но прописанной звуковой карты я не вижу.

[k8]

при нормальной работе, т.е. при установленном драйвере напротив нужного модуля должно стоять - (autoclean)

у меня например lsmod выдает:
[pre]--cut--
via82cxxx_audio        20384   1 (autoclean)
uart401                 7872   0 (autoclean) [via82cxxx_audio]
ac97_codec             12288   0 (autoclean) [via82cxxx_audio]
sound                  70860   0 (autoclean) [via82cxxx_audio uart401]
soundcore               6404   4 (autoclean) [via82cxxx_audio sound]
--cut--[/pre]

[Sean Ingumsky]

У меня ALC650 (Windows говорит, что это Avance Logic) на ABIT7II. Cкачал ALSA 0.9.4, но в списке поддерживаемых такой карты нет. Не знаю, что делать... Я пробовал ставить драйвера для других карт, но, естественно, они не подходят.
Barracuda говорил, что у него та же звуковуха, но на другой материнской плате, он смог всё настроить через ALSA, я - нет. Помогите, плиз.

[s]Исправлено: Sean Ingumsky, 1:52 8-06-2003[/s]

[ruslandh]

Sean Ingumsky
А что про эту карту говорит dmesgи lspci

[Sean Ingumsky]

ruslandh
dmesg пишет:
---сut----
...
PCI: PCI BIOS revision 2.10 entry at 0xfb050, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
PCI: Found IRQ 10 for device 00:1f.1
...
PCI: Found IRQ 11 for device 02:03.0
Redundant entry in serial pci_table.  Please send the output of
lspci -vv, this message (12b9,1008,12b9,00a2)
and the manufacturer and name of serial board or modem board
to serial-pci-info@lists.sourceforge.net.
ttyS04 at port 0xc000 (irq = 11) is a 16550A
...
ICH4: IDE controller on PCI bus 00 dev f9
PCI: Device 00:1f.1 not available because of resource collisions
PCI: Found IRQ 10 for device 00:1f.1
...
---cut---

А вот то, что мне вадаёт lspci:
---cut---
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 11)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 11)
00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 01)
00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 01)
00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 01)
00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corp. 82801DB ISA Bridge (LPC) (rev 01)
00:1f.1 IDE interface: Intel Corp. 82801DB ICH4 IDE (rev 01)
00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 01)
00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)
02:03.0 Serial controller: US Robotics/3Com 56K FaxModem Model 5610 (rev 01)
02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
---cut---
То есть, вроде как, на Intel ссылается...