[Vadikan]

Felis Ferus

А тест довольно странный вышел... смотрите и объясните, плиз:

Об'ясняем

PI/PO scaning with DVD-ROM drives This topic must get raised at least once a week. So here's our best answer: Kprobe is designed to work with burners only. A number of it's features will ONLY work on burners. It is possible to scan discs with LiteOn DVD-ROM drives, but not advisable. DVD-ROM drives do not respond to the read-speed commands from Kprobe, so they will always scan at full speed. This is especially bad for DVDR scanning. DVD-ROM drives do not appear to report the same types of errors as C1-C2 and PI-PO as the burners do. We do not know what they are reporting, but there does not appear to be any predictable relashionship between what gets reported on a ROM drive and what gets reported on a burner. Many people do use ROM drives for scanning errors, and this is certainly better than not scanning at all. But you have to be aware that your scans cannot be compared to scans done in burners. So your only use for the scans is to compare one disc to another as you are searching for the right combination of media and burn speed in your own burner.

Источник (cdfreaks)

A CD-R нормальный скан, учитывая все вышесказанное, конечно.