[k7tolik]

С перемычками GA-8I865GME проблем нет »

Так с ними понятно сняли и все. А так как я вам писал раньше сообщение 1120 сделали? Что со звуком?

Может я не прав? »

Вы руководство по материнке ALiveNF4G-DVI скачали? Смотрели станицу 21 сделали подключение как написано

Скрытый текст

. High Definition Audio supports Jack Sensing, but the panel wire on the
chassis must support HDA to function corre
ctly. Please
follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC’97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don’t
need to connect them for AC’97 audio panel.
E. Enter BIOS Setup Utility. Enter Advanced Settings, and then select
Chipset Configuration. Set the Front Panel Control option from
[Auto] to [Enabled].
F. Enter Windows system. Click the icon on the lower right hand
taskbar to enter Realtek HD Audio Manager. Click “Audio I/O”, sele “Connector Settings”
, choose “Disable front panel jack
detection”, and save the change by clicking “OK”