Компьютерный форум OSzone.net  

Компьютерный форум OSzone.net (http://forum.oszone.net/index.php)
-   WSUS (http://forum.oszone.net/forumdisplay.php?f=99)
-   -   [решено] Проблемы с клиентом WSUS 3.0 (http://forum.oszone.net/showthread.php?t=92689)

nghst 23-10-2007 14:59 665735

[решено] Проблемы с клиентом WSUS 3.0
 
Не загружаются обновления на рабочую станцию. В консоле пишет, что об этой рабочей станции никакой информации не поступало.
Удалил рабочую станцию из консоли, после чего она там больше не появляется. Вывел рабочую станцию из домена, загнал ее туда заново - никакого эффекта.
Кто нить сталкивался с таким?

monkkey 23-10-2007 16:24 665804

Рабочие станции не появляются в консоли WSUS
Это связано с тем, что рабочие станции подготовлены с использованием неправильно подготовленных образов, т.е. без использования утилиты sysprep или других программ для уникальной генерации SID. Такие рабочие станции могут иметь дублирующие значения SusClientID в реестре.
Для решения проблемы необходимо выполнить следующие шаги на рабочей станции:
наберите и выполните в консоли (cmd) команду net stop wuauserv, чтобы остановить сервис WSUS;
запустите regedit и перейдите в ветку реестра HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WindowsUpdate
удалите ключи: PingID, AccountDomainSid, SusClientId;
в консоли выполните команду net start wuauserv, чтобы стартовать сервис WSUS;
в консоли выполните команду wuauclt.exe /resetauthorization /detectnow и подождите минут 10, чтобы завершился цикл регистрации рабочей станции на сервере WSUS;
в консоли WSUS убедитесь, что рабочая станция успешно зарегистрировалась.

Если компьютер был клонирован, используйте утилиту newsid.exe.

nghst 24-10-2007 09:41 666151

Данный способ пробовал - не помог. Переустановил винду в консоле WSUS комп обнаружился, но у него по прежнему висит: доля установленных/неприменимых 0%, и в информации: "Этот компьютер еще не отправлял точет о состоянии".
После wuauclt/detectnow, в логе пишет:
Код:

2007-10-24        12:36:29+0700        1076        5a4        Triggering AU detection through DetectNow api
2007-10-24        12:36:29+0700        1076        68c        AU received event of 1
2007-10-24        12:36:29+0700        1076        68c        WU client succeeds CClientCallRecorder::BeginFindUpdates from AutomaticUpdates with call id {1DD38B3F-6C63-47E5-8C30-C7D1E40F38E6}
2007-10-24        12:36:29+0700        1076        528        WU client executing call {1DD38B3F-6C63-47E5-8C30-C7D1E40F38E6} of type Search Call
2007-10-24        12:36:29+0700        1076        528        DownloadFileInternal failed for http://project:8530/SelfUpdate/wuident.cab: error 0x80190194
2007-10-24        12:36:29+0700        1076        528        IsUpdateRequired failed with error 0x80244019
2007-10-24        12:36:29+0700        1076        528        PT: Using serverID {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2007-10-24        12:36:29+0700        1076        528        WU client failed Searching for update with error 0x80248008
2007-10-24        12:36:29+0700        1076        528        Search Callback Failed, hr is 0x80248008
2007-10-24        12:36:29+0700        1076        528        Setting next AU detection timeout to 2007-10-24 10:36:29
2007-10-24        12:36:29+0700        1076        528        WU client calls back to search call AutomaticUpdates with code Call failed and error 0x80248008
2007-10-24        12:36:29+0700        1076        528        WU client completed and deleted call {1DD38B3F-6C63-47E5-8C30-C7D1E40F38E6}
2007-10-24        12:36:34+0700        1076        448        REPORT EVENT: {397BE068-25F0-4EF4-ADEA-2914A02A88B0}        7        2007-10-24 12:36:29+0700        1        148        101        {D67661EB-2423-451D-BF5D-13199E37DF28}        0        80244019        SelfUpdate        Failure        Software Synchronization        Error: Agent failed detecting with reason: 0x80244019
2007-10-24        12:36:34+0700        1076        448        REPORT EVENT: {6A3DDA20-AAAE-4B74-842C-04E7084874DE}        8        2007-10-24 12:36:29+0700        1        148        101        {00000000-0000-0000-0000-000000000000}        0        80248008        AutomaticUpdates        Failure        Software Synchronization        Error: Agent failed detecting with reason: 0x80248008
2007-10-24        12:36:34+0700        1076        448        Created new event cache file at C:\WINDOWS\SoftwareDistribution\EventCache\{C635AAF8-F7C4-4C68-B986-9F5F7ADCCE31}.bin for writing.
2007-10-24        12:37:04+0700        1076        438        Service received connect notification
2007-10-24        12:37:04+0700        1076        68c        AU received event of 3
2007-10-24        12:37:05+0700        1076        438        Service received disconnect notification
2007-10-24        12:37:05+0700        1076        68c        AU received event of 3
2007-10-24        12:37:06+0700        1076        438        Service received disconnect notification
2007-10-24        12:37:06+0700        1076        68c        AU received event of 3
2007-10-24        12:37:06+0700        1076        438        Service received connect notification
2007-10-24        12:37:06+0700        1076        68c        AU received event of 3
2007-10-24        12:37:07+0700        1076        438        Service received connect notification
2007-10-24        12:37:07+0700        1076        68c        AU received event of 3

Что с этим делать подскажите?

nghst 24-10-2007 12:04 666232

Сделал на 2х машинах Cdiag.exe.
Отличие только в 1 строчке.
На той машине, где работает все нормально эта строка:

This version is WSUS 2.0

Там где не работает:

This version is SUS 1.0

Как на не рабочей машине обновить этот установщик?

Не рабочая машина:
Код:

WSUS Client Diagnostics Tool

Checking Machine State
        Checking for admin rights to run tool . . . . . . . . . PASS
        Automatic Updates Service is running. . . . . . . . . . PASS
        Background Intelligent Transfer Service is not running. PASS
        Wuaueng.dll version 5.4.3790.2180 . . . . . . . . . . . PASS
                This version is SUS 1.0

Checking AU Settings
        AU Option is 3 : Notify Prior to Install. . . . . . . . PASS
                Option is from Policy settings

Checking Proxy Configuration
        Checking for winhttp local machine Proxy settings . . . PASS
                Winhttp local machine access type
                        <Direct Connection>
                Winhttp local machine Proxy. . . . . . . . . .  NONE
                Winhttp local machine ProxyBypass. . . . . . .  NONE
        Checking User IE Proxy settings . . . . . . . . . . . . PASS
                User IE Proxy. . . . . . . . . . . . . . . . .  NONE
                User IE ProxyByPass. . . . . . . . . . . . . .  NONE
                User IE AutoConfig URL Proxy . . . . . . . . .  NONE
                User IE AutoDetect
                AutoDetect not in use

Checking Connection to WSUS/SUS Server
                WUServer = http://project:8530
                WUStatusServer = http://project:8530
        UseWuServer is enabled. . . . . . . . . . . . . . . . . PASS
        Connection to server. . . . . . . . . . . . . . . . . . PASS

WinHttpDownloadFileToMemory(szURLDest, NULL, 0, NULL, NULL, NULL, &downloadBuffe
r) failed with hr=0x80190194

No Error description could be found

Press Enter to Complete

Рабочая машина:
Код:


WSUS Client Diagnostics Tool

Checking Machine State
        Checking for admin rights to run tool . . . . . . . . . PASS
        Automatic Updates Service is running. . . . . . . . . . PASS
        Background Intelligent Transfer Service is not running. PASS
        Wuaueng.dll version 7.0.6000.374. . . . . . . . . . . . PASS
                This version is WSUS 2.0

Checking AU Settings
        AU Option is 2 : Notify Prior to Download . . . . . . . PASS
                Option is from Policy settings

Checking Proxy Configuration
        Checking for winhttp local machine Proxy settings . . . PASS
                Winhttp local machine access type
                        <Direct Connection>
                Winhttp local machine Proxy. . . . . . . . . .  NONE
                Winhttp local machine ProxyBypass. . . . . . .  NONE
        Checking User IE Proxy settings . . . . . . . . . . . . PASS
                User IE Proxy. . . . . . . . . . . . . . . . .  NONE
                User IE ProxyByPass. . . . . . . . . . . . . .  NONE
                User IE AutoConfig URL Proxy . . . . . . . . .  NONE
                User IE AutoDetect
                AutoDetect not in use

Checking Connection to WSUS/SUS Server
                WUServer = http://project:8530
                WUStatusServer = http://project:8530
        UseWuServer is enabled. . . . . . . . . . . . . . . . . PASS
        Connection to server. . . . . . . . . . . . . . . . . . PASS

WinHttpDownloadFileToMemory(szURLDest, NULL, 0, NULL, NULL, NULL, &downloadBuffe
r) failed with hr=0x80190194

No Error description could be found

Press Enter to Complete


nghst 25-10-2007 06:05 666781

В общем разобрался.
Нужно было скачать WindowsUpdateAgent20-x86.exe, и запустить его с ключом:

WindowsUpdateAgent20-x86.exe /wuforce


Время: 08:06.

Время: 08:06.
© OSzone.net 2001-