Nastya |
06-10-2003 11:14 227328 |
Help! Выдает такую надпись при загрузке:Disc Configuration not correct. В чем может быть дело?
|
Giorgievich |
06-10-2003 12:03 227329 |
Nastya
Цитата:
This error is generally seen as the system boots up. *Enter the CMOS setup program and make sure that your hard drive is set correctly. If you receive this error after ensuring that the hard drive is set up correctly, the cable on the drive or controller may be loose, or the Controller card may be partially unseated. Power down the system and reseat the cable or card.
|
|
Время: 02:30.
© OSzone.net 2001-