/interface bridge

add name=bridge1

/interface wireless

set 0 band=2ghz-b/g/n disabled=no distance=indoors ht-rxchains=0,1 ht-txchains=\

0,1 hw-protection-mode=rts-cts l2mtu=2290 mode=ap-bridge \

periodic-calibration=enabled periodic-calibration-interval=10 radio-name="" \

ssid=TEST tx-power=18 tx-power-mode=all-rates-fixed wds-default-bridge=\

bridge1 wds-mode=dynamic wireless-protocol=802.11

/interface pppoe-client

add add-default-route=yes disabled=no interface=ether1 name=pppoe-out1 \

password=********* use-peer-dns=yes user=*********

/interface wireless nstreme

set wlan1 enable-polling=no

/interface wireless security-profiles

set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk eap-methods=\

passthrough group-ciphers=tkip,aes-ccm mode=dynamic-keys unicast-ciphers=\

tkip,aes-ccm wpa-pre-shared-key=77777777 wpa2-pre-shared-key=77777777

/ip pool

add name=dhcp_pool1 ranges=192.168.0.2-192.168.0.254

/ip dhcp-server

add address-pool=dhcp_pool1 disabled=no interface=bridge1 name=dhcp1

/interface bridge port

add bridge=bridge1 interface=ether2

add bridge=bridge1 interface=ether3

add bridge=bridge1 interface=ether4

add bridge=bridge1 interface=ether5

add bridge=bridge1 interface=wlan1

/ip address

add address=10.10.10.10/24 interface=ether1

add address=192.168.0.1/24 interface=bridge1

/ip dhcp-client

add default-route-distance=0 disabled=no interface=ether1

/ip dhcp-server network

add address=192.168.0.0/24 dns-server=192.168.0.1 gateway=192.168.0.1

/ip dns

set allow-remote-requests=yes servers=8.8.8.8

/ip firewall nat

add action=masquerade chain=srcnat src-address=192.168.0.0/24

/ip route

add check-gateway=ping distance=1 gateway=10.10.10.1

/ip service

set telnet disabled=yes

set ftp disabled=yes

set www disabled=yes

set ssh disabled=yes

/ip upnp interfaces

add interface=bridge1 type=internal

add interface=ether1 type=external

add interface=pppoe-out1 type=external

/user set 0 password=test