|
Компьютерный форум OSzone.net » Клиентские ОС Microsoft » Microsoft Windows 95/98/Me (архив) » Дрова для сидюка и крысы в DOS |
|
Дрова для сидюка и крысы в DOS
|
Пользователь Сообщения: 77 |
Друзья, столкнулся с проблемой не знаю как прописать дрова для писюка и мышки ( они стандартные ) в autoexec.bat
Подскажите, что писать то нужно ??? Заранее благодарен !!! |
|
------- Отправлено: 14:13, 02-06-2003 |
Пользователь Сообщения: 93
|
Профиль | Отправить PM | Цитировать LedWorm
Может, я ошибаюсь, но, кажется, Виндовз использует свои драйвера и свое дисковое кэширование для таких устройств, как мыша и CD-ROM. Так что наличие их дров в autoexex.bat только притормаживает комп. [s]Исправлено: obllook, 15:28 2-06-2003[/s] |
------- Отправлено: 14:24, 02-06-2003 | #2 |
Для отключения данного рекламного блока вам необходимо зарегистрироваться или войти с учетной записью социальной сети. Если же вы забыли свой пароль на форуме, то воспользуйтесь данной ссылкой для восстановления пароля. |
Старожил Сообщения: 178
|
Профиль | Отправить PM | Цитировать obllook
В заголовке темы написано что Цитата:
LedWorm В конце с новой строчки пишешь полный путь к обоим файлам драйверов, например C:\dos\mouse.com Но вообщето по поводу CD-rom не уверен никогда не пробЫвал |
|
------- Отправлено: 14:39, 02-06-2003 | #3 |
Пользователь Сообщения: 77
|
Профиль | Сайт | Отправить PM | Цитировать Я попробую, а где взять cdrom.com ???
|
------- Отправлено: 16:53, 02-06-2003 | #4 |
![]() old Teapot Сообщения: 1767
|
Профиль | Отправить PM | Цитировать |
|
------- Отправлено: 16:58, 02-06-2003 | #5 |
Хищник (ушел из жизни) Сообщения: 7167
|
Профиль | Сайт | Отправить PM | Цитировать LedWorm
Если не используешь ДОС-программы, то можно написать в конфигур-х файлах что-то типа "Zdes' byl Vasia". Если используешь, то вот содержимое для AUTOEXEC: mode con codepage prepare=((866) C:\WINDOWS\COMMAND\ega3.cpi) mode con codepage select=866 keyb ru,,C:\WINDOWS\COMMAND\keybrd3.sys И CONFIG.SYS: device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1) Country=007,866,C:\WINDOWS\COMMAND\country.sys В ВинМЕ они не обрабатываются. Дрова для СД и мыши у винды свои |
------- Отправлено: 15:27, 08-06-2003 | #6 |
Новый участник Сообщения: 48
|
Профиль | Отправить PM | Цитировать ==============
Introduction =============== Thanks for purchasing the ASUS high-speed CD-ROM drive. Before using this drive, you are suggested to read this file carefully. The installation disk contains files necessary for the CD-ROM driver for DOS/Win3.x installation. The disk contents include: * ** *ASUSCD.SYS * * * *ASUS CD-ROM driver for MS-DOS/Win3.x. * ** *INSTALL.EXE * * * ASUS CD-ROM drive installation utility. * ** *README.TXT * * * *The description and use of the files. ==================== System Requirement ==================== *Hardware Requirements *--------------------- * * 1. IBM PC/AT or compatible computer * * 2. one free IDE socket * * 3. one IDE CD-ROM drive *Software Requirement *-------------------- * * 1. MS-DOS version 5.0 or later * * 2. Microsoft Windows 3.1 or later * * 3. MS-DOS CD-Extension (MSCDEX.EXE) V2.21 or later ============== Installation ============== *To install the CD-ROM driver for DOS/Win3.x, please follow the *subsequent steps: * *1. Restart your computer in DOS mode. * *2. Insert the CD-ROM Driver Installation Disk into your floopy * * * disk drive (either Drive A or Drive B). * *3. At the DOS prompt, type "A:install" (or "B:install" ![]() * * * [Enter]. * *4. Choose your preferred setup option and follow the instructions * * * on the installation screen. * *5. Reboot your system. *There are two setup options, the Express Setup and the Custom Setup. *Express Setup *------------- * *The Express Setup will install the CD-ROM driver by its default. * *If you are a novice in computer, it is suggested that you use this * *option. * *The Express Setup will * *1. copy Installation Disk files to C:\ASUS_CD directory. * *2. back up CONFIG.SYS and AUTOEXEC.BAT to CONFIG.000 and * * * AUTOEXEC.000 respectively. * *3. modify CONFIG.SYS by adding the following lines: * * * *[COMMON] * * * *DEVICE=C:\ASUS_CD\ASUSCD.SYS /D:ASUSCD01 * * * *LASTDRIVE=Z * *4. modify AUTOEXEC.BAT by adding the following line: * * * *C:\DOS\MSCDEX.EXE /D:ASUSCD01 /V * *or * * * *C:\WINDOWS\COMMAND\MSCDEX.EXE /D:ASUSCD01 /V * * * *depending on where the MSCDEX.EXE is located. *Custom Setup *------------ * *Choose the Custom Setup option to customize the folloing * *installation settings. * *(a) Boot Drive: * * * *The Boot Drive option specifies your booting disk label. * * * *Normally it is set to C. * *(b) Target Directory: * * * *The Target Directory is the path where the device driver is * * * *installed to. By default, it is set to C:\ASUS_RD. * *(c) Device Name: * * * *The Device Name is the name of your CD-ROM device driver, By * * * *default, it is set to ASUSCD01. * *(d) MSCDEX's Directory: * * * *This option specifies the path where the Microsoft CD-Extension * * * *program, MSCDEX.EXE, is located. * *(e) Transfer Mode: * * * *There are three transfer modes available: * * * ** PIO Mode: * * * * * * * The Programmed Input/Output Mode is the most common way * * * * * * * computers transferring data to and from the disk drive. * * * * * * * The ASUS CD-ROM Drive supports PIO Mode Transfer up to * * * * * * * PIO mode 4. If your PC is not out of date, it should be * * * * * * * able to support this mode. * * * ** Multi-word DMA Mode: * * * * * * * This mode utilizes the Bus Master DMA transfer protocol. * * * * * * * The advantage of using the Bus Master DMA transfer mode * * * * * * * is that it uses less CPU resources than the PIO mode and * * * * * * * therefore, it is useful in multi-tasking environments. * * * ** Ultra DMA Mode: * * * * * * * This mode is also known as Ultra-ATA or Ultra-DMA/33. * * * * * * * It is the most up to date technique for IDE bus data * * * * * * * transfer protocol recently. * *Then, the Custome Setup will * *1. copy Installation Disk files to the <Target Path> directory. * *2. back up CONFIG.SYS and AUTOEXEC.BAT to CONFIG.000 and * * * AUTOEXEC.000 respectively. * *3. modify CONFIG.SYS by adding the following line: * * * *Device=<Target Path>\ASUSCD.SYS /D:<Device Name> /<Transfer Mode> * *4. modify AUTOEXEC.BAT by adding the following line: * * * *[COMMON] * * * *<MSCDEX's Directory>\MSCDEX.EXE /D:ASUSCD01 /V * * * *LASTDRIVE=Z The meanings of the drive parameters are described as follows: * * * <Target Path>: * * * * *The path that the CD-ROM driver is installed to. The default * * * * *path is "C:\ASUS_CD". * * * <Device Name>: * * * * *The name of your CD-ROM device driver, "ASUSCD01" is used by * * * * *default. * * * <Transfer Mode>: * * * * *The CD-ROM data transfer mode. If not specified, PIO mode * * * * *will be used. Theree transfer mode are available: * * * * * * * * PIO: *PIO transfer mode. * * * * * * * * DMA: *Mult-word DMA transfer mode. * * * * * * * * UDMA: Ultra DMA transfer mode. * * * <MSCDEX's Directory>: * * * * *The directory where MSCDEX.EXE is located. For more detailed information of the device driver parameters, please refer to DRIVER.TXT. если не разберешся пиши ***@***.com rzd! Почитай Правила! Особое внимание удели п. 3.15 ____ Blast [s]Исправлено: Blast, 19:58 12-06-2003[/s] |
Отправлено: 07:42, 12-06-2003 | #7 |
![]() |
Участник сейчас на форуме |
![]() |
Участник вне форума |
![]() |
Автор темы |
![]() |
Сообщение прикреплено |
| |||||
Название темы | Автор | Информация о форуме | Ответов | Последнее сообщение | |
Крысы | HETPE3B | Флейм | 6 | 19-01-2009 01:40 | |
Дрова для модема. | Maks6713 | Поиск драйверов, прошивок и руководств | 2 | 27-07-2008 17:44 | |
Дрова для Lunix | EXTRIMIST | Железо в Linux | 8 | 08-10-2006 15:10 | |
Встроенные дрова для Линукс. | Guest | Железо в Linux | 30 | 09-06-2004 22:13 | |
Дрова для GeForce FX 5200 | Guest | Microsoft Windows 95/98/Me (архив) | 2 | 30-12-2003 16:20 |
|