Дрова для сидюка и крысы в DOS

[LedWorm]

Друзья, столкнулся с проблемой не знаю как прописать дрова для писюка и мышки ( они стандартные ) в autoexec.bat

Подскажите, что писать то нужно ???

Заранее благодарен !!!

[obllook]

LedWorm
Может, я ошибаюсь, но, кажется, Виндовз использует свои драйвера и свое дисковое кэширование для таких устройств, как мыша и CD-ROM. Так что наличие их дров в autoexex.bat только притормаживает комп.

Исправлено: obllook, 15:28 2-06-2003

[Pavel88]

obllook
В заголовке темы написано что
Дрова для сидюка и крысы в DOS


LedWorm
В конце с новой строчки пишешь полный путь к обоим файлам драйверов, например C:\dos\mouse.com
Но вообщето по поводу CD-rom не уверен никогда не пробывал

[LedWorm]

Я попробую, а где взять cdrom.com ???

[APOSTOL]

Почитай
http://www.forum.oszone.net/topic.cgi?forum=32&topic=73

[Tigr]

LedWorm
Если не используешь ДОС-программы, то можно написать в конфигур-х файлах что-то типа "Zdes' byl Vasia". Если используешь, то вот содержимое для AUTOEXEC:

mode con codepage prepare=((866) C:\WINDOWS\COMMAND\ega3.cpi)

mode con codepage select=866

keyb ru,,C:\WINDOWS\COMMAND\keybrd3.sys

И CONFIG.SYS:
device=C:\WINDOWS\COMMAND\display.sys con=(ega,,1)
Country=007,866,C:\WINDOWS\COMMAND\country.sys

В ВинМЕ они не обрабатываются. Дрова для СД и мыши у винды свои

[rzd]

==============
Introduction
===============

Thanks for purchasing the ASUS high-speed CD-ROM drive. Before using
this drive, you are suggested to read this file carefully.

The installation disk contains files necessary for the CD-ROM driver
for DOS/Win3.x installation. The disk contents include:

* ** *ASUSCD.SYS * * * *ASUS CD-ROM driver for MS-DOS/Win3.x.
* ** *INSTALL.EXE * * * ASUS CD-ROM drive installation utility.
* ** *README.TXT * * * *The description and use of the files.



====================
System Requirement
====================

*Hardware Requirements
*---------------------
* * 1. IBM PC/AT or compatible computer
* * 2. one free IDE socket
* * 3. one IDE CD-ROM drive

*Software Requirement
*--------------------
* * 1. MS-DOS version 5.0 or later
* * 2. Microsoft Windows 3.1 or later
* * 3. MS-DOS CD-Extension (MSCDEX.EXE) V2.21 or later



==============
Installation
==============

*To install the CD-ROM driver for DOS/Win3.x, please follow the
*subsequent steps:

* *1. Restart your computer in DOS mode.

* *2. Insert the CD-ROM Driver Installation Disk into your floopy
* * * disk drive (either Drive A or Drive B).

* *3. At the DOS prompt, type "A:install" (or "B:install") and press
* * * [Enter].

* *4. Choose your preferred setup option and follow the instructions
* * * on the installation screen.

* *5. Reboot your system.


*There are two setup options, the Express Setup and the Custom Setup.

*Express Setup
*-------------
* *The Express Setup will install the CD-ROM driver by its default.
* *If you are a novice in computer, it is suggested that you use this
* *option.

* *The Express Setup will

* *1. copy Installation Disk files to C:\ASUS_CD directory.

* *2. back up CONFIG.SYS and AUTOEXEC.BAT to CONFIG.000 and
* * * AUTOEXEC.000 respectively.

* *3. modify CONFIG.SYS by adding the following lines:
* * * *[COMMON]
* * * *DEVICE=C:\ASUS_CD\ASUSCD.SYS /D:ASUSCD01
* * * *LASTDRIVE=Z

* *4. modify AUTOEXEC.BAT by adding the following line:
* * * *C:\DOS\MSCDEX.EXE /D:ASUSCD01 /V * *or
* * * *C:\WINDOWS\COMMAND\MSCDEX.EXE /D:ASUSCD01 /V
* * * *depending on where the MSCDEX.EXE is located.



*Custom Setup
*------------
* *Choose the Custom Setup option to customize the folloing
* *installation settings.

* *(a) Boot Drive:
* * * *The Boot Drive option specifies your booting disk label.
* * * *Normally it is set to C.

* *(b) Target Directory:
* * * *The Target Directory is the path where the device driver is
* * * *installed to. By default, it is set to C:\ASUS_RD.

* *(c) Device Name:
* * * *The Device Name is the name of your CD-ROM device driver, By
* * * *default, it is set to ASUSCD01.

* *(d) MSCDEX's Directory:
* * * *This option specifies the path where the Microsoft CD-Extension
* * * *program, MSCDEX.EXE, is located.

* *(e) Transfer Mode:
* * * *There are three transfer modes available:

* * * ** PIO Mode:
* * * * * * * The Programmed Input/Output Mode is the most common way
* * * * * * * computers transferring data to and from the disk drive.
* * * * * * * The ASUS CD-ROM Drive supports PIO Mode Transfer up to
* * * * * * * PIO mode 4. If your PC is not out of date, it should be
* * * * * * * able to support this mode.

* * * ** Multi-word DMA Mode:
* * * * * * * This mode utilizes the Bus Master DMA transfer protocol.
* * * * * * * The advantage of using the Bus Master DMA transfer mode
* * * * * * * is that it uses less CPU resources than the PIO mode and
* * * * * * * therefore, it is useful in multi-tasking environments.

* * * ** Ultra DMA Mode:
* * * * * * * This mode is also known as Ultra-ATA or Ultra-DMA/33.
* * * * * * * It is the most up to date technique for IDE bus data
* * * * * * * transfer protocol recently.

* *Then, the Custome Setup will

* *1. copy Installation Disk files to the <Target Path> directory.

* *2. back up CONFIG.SYS and AUTOEXEC.BAT to CONFIG.000 and
* * * AUTOEXEC.000 respectively.

* *3. modify CONFIG.SYS by adding the following line:
* * * *Device=<Target Path>\ASUSCD.SYS /D:<Device Name> /<Transfer Mode>

* *4. modify AUTOEXEC.BAT by adding the following line:
* * * *[COMMON]
* * * *<MSCDEX's Directory>\MSCDEX.EXE /D:ASUSCD01 /V
* * * *LASTDRIVE=Z

The meanings of the drive parameters are described as follows:

* * * <Target Path>:
* * * * *The path that the CD-ROM driver is installed to. The default
* * * * *path is "C:\ASUS_CD".

* * * <Device Name>:
* * * * *The name of your CD-ROM device driver, "ASUSCD01" is used by
* * * * *default.

* * * <Transfer Mode>:
* * * * *The CD-ROM data transfer mode. If not specified, PIO mode
* * * * *will be used. Theree transfer mode are available:

* * * * * * * * PIO: *PIO transfer mode.
* * * * * * * * DMA: *Mult-word DMA transfer mode.
* * * * * * * * UDMA: Ultra DMA transfer mode.

* * * <MSCDEX's Directory>:
* * * * *The directory where MSCDEX.EXE is located.

For more detailed information of the device driver parameters, please
refer to DRIVER.TXT.

если не разберешся пиши ***@***.com

rzd! Почитай Правила (http://forum.oszone.net/rules.html)! Особое внимание удели п. 3.15
____
Blast



Исправлено: Blast, 19:58 12-06-2003