Irji
05-08-2006, 23:06
Доброго времени суток.
Имеется ноутбук Toshiba S5200-902 с установленным ASP 11. На ноуте сгорела встоенная сетевая карта, поэтому использую внешнюю, через PCMCIA. PCMCIA адаптер ToPIC100 PCI to Cardbus Bridge with ZV Support, полностью поддерживается системой.
Проблема в том, что адаптер не включается, dmesg пишет:
PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
PCI: No IRQ known for interrupt pin A of device 0000:02:0b.0. Please try using p ci=biosirq.
Simple Boot Flag at 0x7c set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1154781145.324:1): initialized
highmem bounce pool size: 64 pages
ниже
PCI: No IRQ known for interrupt pin A of device 0000:02:0b.0. Please try using p ci=biosirq.
Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001]
Yenta: no PCI IRQ, CardBus support disabled for this socket.
Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
Yenta: ISA IRQ mask 0x0408, PCI irq 0
Хотя lspci выдает:
02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 33)
т.е. я так понимаю, система его видит, но запустить не может.
Вопрос, как сделать чтобы запустился?
Имеется ноутбук Toshiba S5200-902 с установленным ASP 11. На ноуте сгорела встоенная сетевая карта, поэтому использую внешнюю, через PCMCIA. PCMCIA адаптер ToPIC100 PCI to Cardbus Bridge with ZV Support, полностью поддерживается системой.
Проблема в том, что адаптер не включается, dmesg пишет:
PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
PCI: No IRQ known for interrupt pin A of device 0000:02:0b.0. Please try using p ci=biosirq.
Simple Boot Flag at 0x7c set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1154781145.324:1): initialized
highmem bounce pool size: 64 pages
ниже
PCI: No IRQ known for interrupt pin A of device 0000:02:0b.0. Please try using p ci=biosirq.
Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001]
Yenta: no PCI IRQ, CardBus support disabled for this socket.
Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
Yenta: ISA IRQ mask 0x0408, PCI irq 0
Хотя lspci выдает:
02:0b.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 33)
т.е. я так понимаю, система его видит, но запустить не может.
Вопрос, как сделать чтобы запустился?