Sir Z
23-02-2006, 21:54
Имеется сканер, подключающийся в компу постредством входящей в комплект поставки SCSI-карточки (ISA). Когда я ставил дрова под WinME, все становилось на раз, а вот в 2000 - грабли. Как я понимаю, 2000й драйвер использует ASPI, которого в ней почему-то нет. Последствиями являются:
1) сканер не работает;
2) CD-грабберы типа Catalyst'а не могут работать в цифровом режиме.
Пробовал устанавливать имеющийся в Сети пак aspi_update.zip. В доках к паку написано:
============================================
To install ASPI32.SYS driver for Windows NT 3.5 or 3.51:
1) Copy WNASPI32.DLL into your %SystemRoot%\SYSTEM32 directory.
(%SystemRoot% is usually WINNT\)
2) Copy ASPI32.SYS into your %SystemRoot%\System32\Drivers directory.
3) Start Regedt32 from File Manager/Run... or Command prompt.
4) Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
5) Add a Key called "ASPI32"
6) Add the following Values under that Key
a)ErrorControl REGDWORD 1
b)Start REGDWORD 3
c)Type REGDWORD 1
7) Go to HKLM\System\CurrentControlSet\Services\Aspi32
8) Add a Key called "Parameters"
9) Add the following Value under that Key
a) ExcludeMiniports = ""
10) Exit Regedt32
11) Reboot your system.
12) Go to Control Panel and double-click on Devices
13) Locate ASPI32 and Click on Start. Should see a clock going!
ASPI32.SYS wil be loaded at this point!!
============================================
Вопрос: Control Panel->Devices - это в win2000 где - в Администрирование->Сервисы?
Заранее благодарен.
1) сканер не работает;
2) CD-грабберы типа Catalyst'а не могут работать в цифровом режиме.
Пробовал устанавливать имеющийся в Сети пак aspi_update.zip. В доках к паку написано:
============================================
To install ASPI32.SYS driver for Windows NT 3.5 or 3.51:
1) Copy WNASPI32.DLL into your %SystemRoot%\SYSTEM32 directory.
(%SystemRoot% is usually WINNT\)
2) Copy ASPI32.SYS into your %SystemRoot%\System32\Drivers directory.
3) Start Regedt32 from File Manager/Run... or Command prompt.
4) Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
5) Add a Key called "ASPI32"
6) Add the following Values under that Key
a)ErrorControl REGDWORD 1
b)Start REGDWORD 3
c)Type REGDWORD 1
7) Go to HKLM\System\CurrentControlSet\Services\Aspi32
8) Add a Key called "Parameters"
9) Add the following Value under that Key
a) ExcludeMiniports = ""
10) Exit Regedt32
11) Reboot your system.
12) Go to Control Panel and double-click on Devices
13) Locate ASPI32 and Click on Start. Should see a clock going!
ASPI32.SYS wil be loaded at this point!!
============================================
Вопрос: Control Panel->Devices - это в win2000 где - в Администрирование->Сервисы?
Заранее благодарен.