Guest
02-08-2004, 23:52
У меня
монитор Dell P780 (держит 1024x768@100), видеокарта S3 Trio3D/2X 4Mb.
Red Hat 9, XFree-4.3.0;
И монитор в X-сах при различных разрешениях (1024x768, 800x600, 640x480) выдаёт только 60Hz refresh rate (видно это в BSOD меню монитора, да и мерцание заметно), хотя в Win2k и Win98SE спокойно пашут режимы 1024x768@85.
Прочитал, что это можно исправить с помощью, указания мод в XF86Config. Но что-то у меня ничего не получилось - XFree не видит их. Может кто, подскажет что не так.
Интересно, почему в /var/log/XF86Config.0.log пишется
(II) VESA(0): Not using mode "test" (no mode of this name) //(вроде она указана)
и
что значит строчка
(II) VESA(0): Attempting to use 85Hz refresh for mode "1024x768" (117)
Почему эта попытка проваливается, хотя ничего не сказано о провале (ведь монитор пашет в режиме 1024x768@60 см. выше).
Заранее благодарен.
P.S.
1) Я пробовал в Modeline и в Mode указывать имя "1024x768", но это также не помогло
2) Как узнать поддерживаемые Dot Clock моей видеокартой.
3) Кстати заметил любопытную строчку в /var/log/XFree86.0.log
(--) VESA(0): unexpected EDID version 255 revision 255
(Значит ли это, что XFree не может правитьно прочитать EDID моего моника. Прога Get-edid определяет его как V1.2, что хоть похоще на истину.)
Содержимое /etc/X11/XF86Config:
______________________________
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
# VendorName "DELL"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Dell P780"
DisplaySize 330 240
HorizSync 30.0 - 85.0
VertRefresh 48.0 - 120.0
Option "dpms"
# ModeLine "test1" 78.75 1024 1040 1136 1312 768 769 772 800
# ModeLine "test2" 94.5 1024 1072 1168 1376 768 769 772 808
# Modes "test1" "test2"
# EDID version 1 revision 2
Mode "test" # vfreq 75.029Hz, hfreq 60.023kHz
DotClock 78.750000
HTimings 1024 1040 1136 1312
VTimings 768 769 772 800
Flags "+HSync" "+VSync"
EndMode
EndSection
Section "Device"
Identifier "Videocard0"
Driver "vesa"
VendorName "Videocard vendor"
BoardName "S3 Trio3D/2X"
VideoRam 4096
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "test" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
______________________________
Если надо могу выслать /var/log/XFree86.0.log
монитор Dell P780 (держит 1024x768@100), видеокарта S3 Trio3D/2X 4Mb.
Red Hat 9, XFree-4.3.0;
И монитор в X-сах при различных разрешениях (1024x768, 800x600, 640x480) выдаёт только 60Hz refresh rate (видно это в BSOD меню монитора, да и мерцание заметно), хотя в Win2k и Win98SE спокойно пашут режимы 1024x768@85.
Прочитал, что это можно исправить с помощью, указания мод в XF86Config. Но что-то у меня ничего не получилось - XFree не видит их. Может кто, подскажет что не так.
Интересно, почему в /var/log/XF86Config.0.log пишется
(II) VESA(0): Not using mode "test" (no mode of this name) //(вроде она указана)
и
что значит строчка
(II) VESA(0): Attempting to use 85Hz refresh for mode "1024x768" (117)
Почему эта попытка проваливается, хотя ничего не сказано о провале (ведь монитор пашет в режиме 1024x768@60 см. выше).
Заранее благодарен.
P.S.
1) Я пробовал в Modeline и в Mode указывать имя "1024x768", но это также не помогло
2) Как узнать поддерживаемые Dot Clock моей видеокартой.
3) Кстати заметил любопытную строчку в /var/log/XFree86.0.log
(--) VESA(0): unexpected EDID version 255 revision 255
(Значит ли это, что XFree не может правитьно прочитать EDID моего моника. Прога Get-edid определяет его как V1.2, что хоть похоще на истину.)
Содержимое /etc/X11/XF86Config:
______________________________
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
# VendorName "DELL"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Dell P780"
DisplaySize 330 240
HorizSync 30.0 - 85.0
VertRefresh 48.0 - 120.0
Option "dpms"
# ModeLine "test1" 78.75 1024 1040 1136 1312 768 769 772 800
# ModeLine "test2" 94.5 1024 1072 1168 1376 768 769 772 808
# Modes "test1" "test2"
# EDID version 1 revision 2
Mode "test" # vfreq 75.029Hz, hfreq 60.023kHz
DotClock 78.750000
HTimings 1024 1040 1136 1312
VTimings 768 769 772 800
Flags "+HSync" "+VSync"
EndMode
EndSection
Section "Device"
Identifier "Videocard0"
Driver "vesa"
VendorName "Videocard vendor"
BoardName "S3 Trio3D/2X"
VideoRam 4096
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "test" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
______________________________
Если надо могу выслать /var/log/XFree86.0.log