PDA

Показать полную графическую версию : [решено] Некорректная работа клавиатуры


mak7imyss
26-07-2019, 10:15
Добрый день. Возникла проблема с некорректной работой клавиатуры, а именно при нажатии на часть клавиш - печать обычна а-а, б-б; другая делает что-то вроде в - ув, ы-о+; третья и сочетания вообще что-то выполняют, например гибернацию или выключение. Проблема возникла внезапно, т.к. утром подобного не наблюдалось, а вечером при включении обнаружилось сие поведение. До этого некогда были подобные случаи на другой системе, тогда помогала точка восстановления. Не знаю что конкретно нужно, поэтому попытаюсь приложить все что смог сделать.
Разумеется проверил,и чистоту клавиатуры, и залипание, и попробовал ее сменить на другую.

akok
27-07-2019, 15:35
https://safezone.cc/threads/9188/

AVZ, меню "Файл - Выполнить скрипт" -- Скопировать ниже написанный скрипт-- Нажать кнопку "Запустить".
{Исправление в службах в реестре, значения ImagePath.
Данный скрипт распространяется свободно и может быть модицифирован по согласованию с авторами - представителями SafeZone.cc
При публикации скрипта данный комментарий и ссылка на SafeZone.cc обязателена. }
var DescriptionTextWuauServ, DispayNameTextWuauServ, DescriptionTextBITS: String;
DispayNameTextBITS, FullPathSystem32, NameFolderSystem32, FileServiceDll: String;
ImagePathStr, RootStr, SubRootStr, LangID: string;
AllRoots, AllKeys, RootsRestored, KeysRestored, KeysFixed: integer;
FinishMsg, RestoreMsg, FixMsg, CheckMsg: String;
RegSectMsg, ParamMsg, ParamValueMsg, InRegSectMsg, CorrectMsg, RestMsg: String;

procedure CheckAndRestoreSection(Root: String);
begin
Inc(AllRoots);
if RegKeyExistsEx('HKLM', Root) then
RegKeyResetSecurity('HKLM', Root)
else
begin
Inc(RootsRestored);
RegKeyCreate('HKLM', Root);
AddToLog(RegSectMsg + Root + RestMsg);
end;
end;

procedure CheckAndRestoreSubSection;
begin
CheckAndRestoreSection(SubRootStr);
end;

procedure RestoredMsg(Root, Param: String);
begin
AddToLog(ParamMsg + Param + InRegSectMsg + Root + RestMsg);
Inc(KeysRestored);
end;

procedure FixedMsg(Root, Param: String);
begin
AddToLog(ParamValueMsg + Param + InRegSectMsg + Root + CorrectMsg);
Inc(KeysFixed);
end;

procedure RestoreStrParam(Root, Param, Value: String);
begin
RegKeyStrParamWrite('HKLM', Root, Param, Value);
RestoredMsg(Root, Param);
end;

procedure CheckAndRestoreStrParam(Root, Param, Value: String);
begin
Inc(AllKeys);
if not RegKeyParamExists('HKLM', Root, Param) then
RestoreStrParam(Root, Param, Value);
end;

procedure CheckAndRestoreIntParam(Root, Param: String; Value: Integer);
begin
Inc(AllKeys);
if not RegKeyParamExists('HKLM', Root, Param) then
begin
RegKeyIntParamWrite('HKLM', Root, Param, Value);
RestoredMsg(Root, Param);
end;
end;

procedure CheckAndRestoreMultiSZParam(Param, Value: String);
begin
Inc(AllKeys);
if not RegKeyParamExists('HKLM', RootStr, Param) then
begin
ExecuteFile('REG ADD HKLM\' + RootStr + ' /v ' + Param + Value, '', 0, 10000, true);
RestoredMsg(RootStr, Param);
end;
end;

// Исправление значения параметра ImagePath для служб 'wuauserv' и 'BITS'
procedure ImagePathFix(Node, Srv: String);
var RegStr: String;
begin
RegStr := 'SYSTEM\' + Node + '\Services\' + Srv;
if RegKeyExistsEx('HKLM', RegStr) then
begin
Inc(AllKeys);
RegKeyResetSecurity('HKLM', RegStr);
RegKeyStrParamWrite('HKLM', RegStr, 'ImagePath', ImagePathStr);
FixedMsg(RegStr, 'ImagePath');
end;
end;

{ Выполнение исправление всех ключей в ветках -
'HKLM\SYSTEM\CurrentControlSet\Services\BITS' и 'HKLM\SYSTEM\CurrentControlSet\Services\wuauserv'}
procedure CorrectRegistryRoot(DescriptionText, DisplayNameText, Srv: String);
var FileServiceDll, CCSNumber: string;
i : integer;
begin
if Srv = 'BITS' then
FileServiceDll := FullPathSystem32 + 'qmgr.dll'
else
FileServiceDll := FullPathSystem32 + 'wuauserv.dll';
RootStr:= 'SYSTEM\CurrentControlSet\Services\' + Srv;

CheckAndRestoreSection(RootStr);

CheckAndRestoreStrParam(RootStr, 'Description', DescriptionText);
CheckAndRestoreStrParam(RootStr, 'DisplayName', DisplayNameText);
CheckAndRestoreStrParam(RootStr, 'ObjectName', 'LocalSystem');

Inc(AllKeys);
if not RegKeyParamExists('HKLM', RootStr, 'ImagePath') then
RestoreStrParam(RootStr, 'ImagePath', ImagePathStr)
else
begin
Dec(AllKeys);
if LowerCase(RegKeyStrParamRead('HKLM', RootStr, 'ImagePath')) <> LowerCase(ImagePathStr) then
for i:= 0 to 999 do
begin
if i > 0 then
CCSNumber := FormatFloat('ControlSet000', i)
else
CCSNumber := 'CurrentControlSet';
ImagePathFix(CCSNumber, Srv);
end;
end;

CheckAndRestoreIntParam(RootStr, 'ErrorControl', 1);
CheckAndRestoreIntParam(RootStr, 'Start', 2);
CheckAndRestoreIntParam(RootStr, 'Type', 32);

if Srv = 'BITS' then
begin
CheckAndRestoreMultiSZParam('DependOnService', ' /t REG_MULTI_SZ /d RpcSs');
CheckAndRestoreMultiSZParam('DependOnGroup', ' /t REG_MULTI_SZ');
end;

SubRootStr:= RootStr + '\Enum';
CheckAndRestoreSubSection;

CheckAndRestoreStrParam(SubRootStr, '0', 'Root\LEGACY_' + UpperCase(Srv) + '\0000');
CheckAndRestoreIntParam(SubRootStr, 'Count', 1);
CheckAndRestoreIntParam(SubRootStr, 'NextInstance', 1);

SubRootStr := RootStr + '\Security';
CheckAndRestoreSubSection;

Inc(AllKeys);
if not RegKeyParamExists('HKLM', SubRootStr, 'Security') then
begin
RegKeyBinParamWrite('HKLM', SubRootStr, 'Security', '01,00,14,80,78,00,00,00,84,00,00,00,14,00,00,00,30,00,00,00,02,00,1c,00,01,00,00,00,02,80,14,00,ff, 00,0f,00,01,01,00,00,00,00,00,01,00,00,00,00,02,00,48,00,03,00,00,00,00,00,14,00,9d,00,02,00,01,01,0 0,00,00,00,00,05,0b,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,20,02,00,00 ,00,00,14,00,ff,01,0f,00,01,01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00,01, 01,00,00,00,00,00,05,12,00,00,00');
RestoredMsg(SubRootStr, 'Security');
end;

SubRootStr:= RootStr + '\Parameters';
CheckAndRestoreSubSection;

Inc(AllKeys);
if not RegKeyParamExists('HKLM', SubRootStr, 'ServiceDll') then
begin
RegKeyParamWrite('HKLM', SubRootStr, 'ServiceDll', 'REG_EXPAND_SZ', FileServiceDll);
RestoredMsg(SubRootStr, 'ServiceDll');
end
else if LowerCase(RegKeyStrParamRead('HKLM', SubRootStr, 'ServiceDll')) <> LowerCase(FileServiceDll) then
begin
RegKeyParamWrite('HKLM', SubRootStr, 'ServiceDll', 'REG_EXPAND_SZ', FileServiceDll);
FixedMsg(SubRootStr, 'ServiceDll');
end
end;

{ Главное выполнение }
begin
ClearLog;
ExpRegKey('HKLM', 'SYSTEM\CurrentControlSet\Services\wuauserv', 'wuauserv.reg');
ExpRegKey('HKLM', 'SYSTEM\CurrentControlSet\Services\BITS', 'BITS.reg');
LangID:= RegKeyStrParamRead('HKLM', 'SYSTEM\CurrentControlSet\Control\Nls\Language', 'InstallLanguage');
if LangID = '0419' then
begin
DescriptionTextWuauServ := 'Включает загрузку и установку обновлений Windows. Если служба отключена, то на этом компьютере нельзя будет использовать возможности автоматического обновления или веб-узел Центра обновления Windows.';
DispayNameTextWuauServ := 'Автоматическое обновление';
DescriptionTextBITS := 'Обеспечивает передачу данных между клиентами и серверами в фоновом режиме. Если служба BITS отключена, такие возможности, как Windows Update, не могут правильно работать.';
DispayNameTextBITS := 'Фоновая интеллектуальная служба передачи (BITS)';
AddToLog('Операционная система - русская');
FinishMsg := '–––– Восстановление завершено ––––';
RestoreMsg := 'Восстановлено разделов\параметров: ';
FixMsg := 'Исправлено параметров: ';
CheckMsg := 'Проверено разделов\параметров: ';
RegSectMsg := 'Раздел реестра HKLM\';
ParamMsg := 'Параметр ';
ParamValueMsg := 'Значение параметра ';
InRegSectMsg := ' в разделе реестра HKLM\';
CorrectMsg := ' исправлено на оригинальное.';
RestMsg := 'восстановлен.';
end
else if LangID = '0409' then
begin
DescriptionTextWuauServ := 'Enables the download and installation of Windows updates. If this service is disabled, this computer will not be able to use the Automatic Updates feature or the Windows Update Web site.';
DispayNameTextWuauServ := 'Automatic Updates';
DescriptionTextBITS := 'Transfers data between clients and servers in the background. If BITS is disabled, features such as Windows Update will not work correctly.';
DispayNameTextBITS := 'Background Intelligent Transfer Service';
AddToLog('Operation system - english');
FinishMsg := '–––– Restoration finished ––––';
RestoreMsg := 'Sections\parameters restored: ';
FixMsg := 'Parameters corrected: ';
CheckMsg := 'Sections\parameters checked: ';
RegSectMsg := 'Registry section HKLM\';
ParamMsg := 'Parameter ';
ParamValueMsg := 'Value of parameter ';
InRegSectMsg := ' in registry section HKLM\';
CorrectMsg := ' corrected on original.';
RestMsg := ' restored.';
end;
AddToLog('');

{ Определение папки X:\Windows\System32\ }
NameFolderSystem32 := RegKeyStrParamRead('HKLM', 'SYSTEM\CurrentControlSet\Control\Windows', 'SystemDirectory');
ImagePathStr := NameFolderSystem32 + '\svchost.exe -k netsvcs';
Delete(NameFolderSystem32, 1, pos('\', NameFolderSystem32) - 1);
FullPathSystem32 := GetEnvironmentVariable('WinDir') + NameFolderSystem32 + '\';

AllRoots := 0;
AllKeys := 0;
RootsRestored := 0;
KeysRestored := 0;
KeysFixed := 0;

CorrectRegistryRoot(DescriptionTextBITS, DispayNameTextBITS, 'BITS');
CorrectRegistryRoot(DescriptionTextWuauServ, DispayNameTextWuauServ, 'wuauserv');

AddToLog('');
AddToLog(FinishMsg);
AddToLog('');
AddToLog(RestoreMsg + IntToStr(RootsRestored) + ' \ ' + IntToStr(KeysRestored));
AddToLog(FixMsg + IntToStr(KeysFixed));
AddToLog(CheckMsg + IntToStr(AllRoots) + ' \ ' + IntToStr(AllKeys));
SaveLog(RegKeyStrParamRead('HKEY_CURRENT_USER', 'Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders', 'Desktop') + '\Correct_wuauserv&BITS.log');
RebootWindows(false);
end.


После выполнения скрипта на рабочем столе появится текстовый файл Correct_wuauserv&BITS. Его необходимо прикрепить к следующему посту в теме.

После нужен свежий лог автологера

mak7imyss
27-07-2019, 17:28
Пожалуйста

Sandor
29-07-2019, 10:00
В настройках прокси "Антизапрет" ставили самостоятельно?

mak7imyss
29-07-2019, 18:33
Нет

Sandor
30-07-2019, 08:40
"Пофиксите" в HijackThis (http://forum.oszone.net/post-1430293-2.html):

R1 - HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings: [AutoConfigURL] = https://antizapret.prostovpn.org/proxy.pac
R1 - HKLM\System\CurrentControlSet\services\NlaSvc\Parameters\Internet\ManualProxies: (default) = 0https://antizapret.prostovpn.org/proxy.pac


и попробовал ее сменить на другую »
Эта другая заведомо исправная?

mak7imyss
31-07-2019, 01:33
Эта другая заведомо исправная? »
Да.
Все прекратилось после выполнения скрипта (http://forum.oszone.net/post-2881605-2.html).
Спасибо большое.

Sandor
31-07-2019, 08:09
В завершение:

Загрузите SecurityCheck by glax24 & Severnyj (https://safezone.cc/resources/security-check-by-glax24.25/download), сохраните утилиту на Рабочем столе и извлеките из архива.
Запустите двойным щелчком мыши (если Вы используете Windows XP) или из меню по щелчку правой кнопки мыши Запустить от имени администратора (если Вы используете Windows Vista/7/8/8.1/10)
Если увидите предупреждение от вашего фаервола или SmartScreen относительно программы SecurityCheck, не блокируйте ее работу
Дождитесь окончания сканирования, откроется лог в блокноте с именем SecurityCheck.txt
Если Вы закрыли Блокнот, то найти этот файл можно в корне системного диска в папке с именем SecurityCheck, например C:\SecurityCheck\SecurityCheck.txt
Прикрепите этот файл к своему следующему сообщению.

mak7imyss
02-08-2019, 20:55
Вот

Sandor
03-08-2019, 16:14
------------------------------- [ Windows ] -------------------------------
Internet Explorer 11.648.17134.0 Внимание! Скачать обновления (https://www.catalog.update.microsoft.com/Search.aspx?q=KB4507435)
Автоматическое обновление отключено
--------------------------- [ OtherUtilities ] ----------------------------
Picasa 3 v.3.9.141.259 Данная программа больше не поддерживается разработчиком.
-------------------------------- [ Arch ] ---------------------------------
WinRAR 5.61 (64-разрядная) v.5.61.0 Внимание! Скачать обновления (https://www.rarlab.com/download.htm)
--------------------------------- [ P2P ] ---------------------------------
µTorrent 3.5.0 Внимание! Клиент сети P2P! Может содержать рекламные модули или использоваться для скачивания нежелательного контента.
-------------------------------- [ Java ] ---------------------------------
Java 8 Update 211 v.8.0.2110.12 Внимание! Скачать обновления (http://www.oracle.com/technetwork/java/javase/downloads/jre8-downloads-2133155.html)
^Удалите старую версию и установите новую (jre-8u221-windows-i586.exe)^
------------------------------- [ Browser ] -------------------------------
Google Chrome v.75.0.3770.142 Внимание! Скачать обновления (https://www.google.ru/chrome/browser/desktop/index.html)
^Проверьте обновления через меню Справка - О Google Chrome!^


Читайте Рекомендации после лечения. (http://forum.oszone.net/post-1838507-9.html)




© OSzone.net 2001-2012