Проблемы при загрузке ноутбука - предположительно сбой HDD

[mkreine]

Всем привет!

Есть ноут, купленный 2 года назад. Всегда нормально загружался, а сейчас при загрузке стал выдавать какие-то проблемы с инициализацией свопа, но, тем не менее, загрузился. Я проанализировал хард смартом. Что можете сказать? Инфа под спойлером.


[root@localhost dev]# smartctl /dev/sda -a
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0-862.2.3.el7.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: HGST Travelstar 5K1000
Device Model: HGST HTS541010A9E680
Serial Number: JD1009DMG64U8K
LU WWN Device Id: 5 000cca 828c2cc4d
Firmware Version: JA0OA710
User Capacity: 1*000*204*886*016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jun 26 16:08:25 2018 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x51) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 209) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0025 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0023 176 100 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 440
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x002f 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1089
10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 440
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 65536
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 075 056 045 Old_age Always - 25 (Min/Max 22/25)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 91
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 983055
193 Load_Cycle_Count 0x0032 084 084 000 Old_age Always - 164677
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 100 100 000 Old_age Always - 0
223 Load_Retry_Count 0x002a 100 099 000 Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[root@localhost dev]#

[mkreine]

Добавлю:

в boot.log такое:


[ TIME ] Timed out waiting for device dev-mapper-centos_192\x2dswap.device.
[DEPEND] Dependency failed for /dev/mapper/centos_192-swap.
[DEPEND] Dependency failed for Swap.
[FAILED] Failed to start udev Wait for Complete Device Initialization.
See 'systemctl status systemd-udev-settle.service' for details.


далее...


[root@localhost log]# systemctl status systemd-udev-settle.service
● systemd-udev-settle.service - udev Wait for Complete Device Initialization
Loaded: loaded (/usr/lib/systemd/system/systemd-udev-settle.service; static; vendor preset: disabled)
Active: failed (Result: exit-code) since Вт 2018-06-26 16:04:55 CEST; 19min ago
Docs: man:udev(7)
man:systemd-udevd.service(8)
Process: 530 ExecStart=/usr/bin/udevadm settle (code=exited, status=1/FAILURE)
Main PID: 530 (code=exited, status=1/FAILURE)

июн 26 16:02:54 localhost.localdomain systemd[1]: Starting udev Wait for Complete Device Initialization...
июн 26 16:04:55 localhost.localdomain systemd[1]: systemd-udev-settle.service: main process exited, code=exited, status=1/FAILURE
июн 26 16:04:55 localhost.localdomain systemd[1]: Failed to start udev Wait for Complete Device Initialization.
июн 26 16:04:55 localhost.localdomain systemd[1]: Unit systemd-udev-settle.service entered failed state.
июн 26 16:04:55 localhost.localdomain systemd[1]: systemd-udev-settle.service failed.
[root@localhost log]#

что вообще происходит? если я его перезагружу, он перезагрузится нормально?


И ещё в логах такое есть (приведен только фрагмент, это отображалось при загрузке):

^[[0m^[[31m* ^[[0m] (1 of 2) A start job is running for udev Wait for Complete Device Initialization (11s / 2min 54s)
^[[K[^[[1;31m*^[[0m^[[31m* ^[[0m] (1 of 2) A start job is running for udev Wait for Complete Device Initialization (12s / 2min 54s)
^[[K[^[[31m*^[[1;31m*^[[0m^[[31m* ^[[0m] (1 of 2) A start job is running for udev Wait for Complete Device Initialization (12s / 2min 54s)
^[[K[ ^[[31m*^[[1;31m*^[[0m^[[31m* ^[[0m] (2 of 2) A start job is running for dev-mapper-centos_192\x2dswap.device (19s / 1min 30s)
^[[K[ ^[[31m*^[[1;31m*^[[0m^[[31m* ^[[0m] (2 of 2) A start job is running for dev-mapper-centos_192\x2dswap.device (19s / 1min 30s)
^[[K[ ^[[31m*^[[1;31m*^[[0m^[[31m*^[[0m] (2 of 2) A start job is running for dev-mapper-centos_192\x2dswap.device (20s / 1min 30s)
^[[K[ ^[[31m*^[[1;31m*^[[0m] (1 of 2) A start job is running for udev Wait for Complete Device Initialization (14s / 2min 54s)
^[[K[ ^[[31m*^[[0m] (1 of 2) A start job is running for udev Wait for Complete Device Initialization (15s / 2min 54s)
^[[K[ ^[[31m*^[[1;31m*^[[0m] (1 of 2) A start job is running for udev Wait for Complete Device Initialization (15s / 2min 54s)
^[[K[ ^[[31m*^[[1;31m*^[[0m^[[31m*^[[0m] (2 of 2) A start job is running for dev-mapper-centos_192\x2dswap.device (22s / 1min 30s)
^[[K[ ^[[31m*^[[1;31m*^[[0m^[[31m* ^[[0m] (2 of 2) A start job is running for dev-mapper-centos_192\x2dswap.device (22s / 1min 30s)
^[[K[ ^[[31m*^[[1;31m*^[[0m^[[31m* ^[[0m] (2 of 2) A start job is running for dev-mapper-centos_192\x2dswap.device (23s / 1min 30s)
^[[K[^[[31m*^[[1;31m*^[[0m^[[31m* ^[[0m] (1 of 2) A start job is running for udev Wait for Complete Device Initialization (17s / 2min 54s)

[Jula0071]

mkreine, у диска состояние поганенькое. Очень много для его возраста 193 Load_Cycle_Count 0x0032 084 084 000 Old_age Always - 164677, также 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 65536 (последняя цифра очень не нравится круглостью - счётчик переполнился?) и 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 983055 нехорошо.

Диск я бы заменил, причём, на SSD. Бекапы есть? ;)

По логической структуре, судя по всему, вы используете LVM, ну вот и покажите выхлоп команд pvs, vgs, lvs. Ну и содержимое /etc/fstab

[mkreine]

[root@localhost kis]# pgs
bash: pgs: команда не найдена...
[root@localhost kis]# vgs
VG #PV #LV #SN Attr VSize VFree
centos_192 1 3 0 wz--n- 930,31g 4,00m
[root@localhost kis]# lgs
bash: lgs: команда не найдена...
[root@localhost kis]#



[root@localhost kis]# cat /etc/fstab

#
# /etc/fstab
# Created by anaconda on Thu Mar 8 12:09:33 2018
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
/dev/mapper/centos_192-root / xfs defaults 0 0
UUID=75cdb1e7-d2d9-49f4-a8ce-2f6b84b36641 /boot xfs defaults 0 0
UUID=DBAD-78F5 /boot/efi vfat umask=0077,shortname=winnt 0 0
/dev/mapper/centos_192-home /home xfs defaults 0 0
/dev/mapper/centos_192-swap swap swap defaults 0 0
[root@localhost kis]#


Что, прям так срочно заменять?

[DVDshnik]

Менять как можно скорее.