удалить mbr

[xvc]

Какой загрузочной утилитой (кроме стандартной fix mbr) можно удалить либо заменить на нормальную mbr, желательно не вводя никаких команд и чтобы sata-диски понимала?

[Vitek 07]

чтобы sata-диски понимала »
Ээ, а при чем тут MBR и SATA диски?
Какой загрузочной утилитой »
bootice

[ShaddyR]

fdisk /mbr

[iskander-k]

Тема не имеет отношение к защите. Переношу в ХВЗ.

[Amigos]

bootice » + BCRWIZ.EXE , которая является графическим интерфейсом для bootsect.exe
C:\>bootsect.exe /help

bootsect {/help|/nt60|/nt52} {SYS|ALL|<DriveLetter>:} [/force] [/mbr]

Boot sector restoration tool

Bootsect.exe updates the master boot code for hard disk partitions in order to
switch between BOOTMGR and NTLDR. You can use this tool to restore the boot
sector on your computer.

/help Displays these usage instructions.

/nt52 Applies the master boot code that is compatible with NTLDR to SYS,
ALL, or <DriveLetter>. The operating system installed on SYS, ALL, or
<DriveLetter> must be older than Windows Vista.

/nt60 Applies the master boot code that is compatible with BOOTMGR to SYS,
ALL, or <DriveLetter>. The operating system installed on SYS, ALL, or
<DriveLetter> must be Windows Vista or Windows Server 2008.

SYS Updates the master boot code on the system partition used to boot
Windows.

ALL Updates the master boot code on all partitions. ALL does not
necessarily update the boot code for each volume. Instead, this
option updates the boot code on volumes that could be used as Windows
boot volumes, which excludes any dynamic volumes that are not
connected with an underlying disk partition. This restriction is
present because boot code must be located at the beginning of a disk
partition.

<DriveLetter> Updates the master boot code on the volume associated with this
drive letter. Boot code will not be updated if either 1)
<DriveLetter> is not associated with a volume or 2) <DriveLetter> is
associated with a volume not connected to an underlying disk
partition.

/force Forcibly dismounts the volume(s) during the boot code update. You
should use this option with caution.

If Bootsect.exe cannot gain exclusive volume access then the file
system may overwrite the boot code before the next reboot.
Bootsect.exe always attempts to lock and dismount the volume before
each update. When /force is specified, a forced dismount is attempted
if the initial lock attempt fails. A lock can fail, for example, if
files on the target volume are currently opened by other programs.

When successful, a forced dismount allows exclusive volume access and
a reliable boot code update even though the initial lock failed. At
the same time, a forced dismount invalidates all open handles to files
on the target volume. This could result in unexpected behavior from
the programs that opened these files. Therefore, you should use this
option with caution.

/mbr Updates the Master Boot Record without changing the partition table on
sector 0 of the disk that contains the partition specified by SYS, ALL,
or drive letter. When used with /nt52 option, the master boot record
is compatible with operating systems older than Windows Vista. When
used with the /nt60 option, the master boot record is compatible with
Windows Vista or Windows Server 2008.

Example:

To apply the master boot code that is compatible with NTLDR to the volume
labeled E:, use the following command:

bootsect /nt52 E:

[lxa85]

А в контексте такой вопрос:
При распаковке нового HDD, gparted (первое что попалось) сказал, что на диске отсутствует таблица разделов и предложил ее создать. Далее уже создавались разделы с той или иной файловой системой, форматировались, назначались флаги и т.д.
Вопрос : Как удалить таблицу разделов?

[ShaddyR]

Как удалить таблицу разделов? »
редактором диска?

[Amigos]

Как удалить таблицу разделов? » удалить все разделы.
таблица разделов останется, но будет пустая.

или как вариант забить mbr нулями.

[El Scorpio]

или как вариант забить mbr нулями. »
через тот же gparted

[lxa85]

ShaddyR, Amigos, El Scorpio, спасибо, при первом же удобном случае попробую поколдовать. :)