sgww
25-09-2010, 14:03
Привет ...
Не получается настроить VPN в качестве клиента стандартный Windows клиент, к железке Zywall 35 ...
Обе стороны смотрят в интернет с реальными IP
IP Zywall: 212.34.22.147
IP Windows 7: 92.67.132.56
Настройки Zywall:
VPN - GATEWAY POLICY - EDIT
Property
Name: Secure_VPN
Gateway Policy Information
My Address: 212.34.22.147
Primary Remote Gateway: 92.67.132.56
Authentication Key
Pre-Shared Key: **********
Local ID Type: IP
Content: 212.34.22.147
Peer ID Type: IP
Content: 92.67.132.56
Extended Authentication
Enable Extended Authentication: on
Client mode: on
User Name: user
Password: ******
IKE Proposal
Negotiation Mode: Main
Encryption Algorithm: 3DES
Authentication Algorithm: MD5
SA Life Time (Seconds):28800
Key Group: DH2
Enable Multiple Proposals:on
VPN - NETWORK POLICY - EDIT
Property
Active: on
Allow NetBIOS broadcast Traffic Through IPSec Tunnel: on
Gateway Policy Information
Secure_VPN
Local Network
Address Type: Subnet
Starting IP Address: 192.168.0.0
Ending IP Address / Subnet Mask: 255.255.255.0
Local Port Start:0 End:0
Remote Network
Address Type: Single Adress
Starting IP Address: 92.67.132.56
IPSec Proposal
Encapsulation Mode: Tunel
Active Protocol: ESP
Encryption Algorithm: 3DES
Authentication Algorithm: MD5
SA Life Time (Seconds): 28800
Perfect Forward Secrecy (PFS): none
Enable Replay Detection: on
Enable Multiple Proposals: on
В Windows создал VPN подключение, забил логин, пароль PRE shared key ...
Перепробывал все алгоритмы в настройках IPSec (соответственно меняя и на Zyxel) итог одни
В логах железки:
vs. My Remote [92.67.132.56]-[92.67.132.56]
Recv ID: SINGLE, [92.67.132.56]-[92.67.132.56]
[ID] : Rule [VPN_ rule] Verifying Remote ID failed:
Если кто настраивал у себя, поделитесь конфигом .... голова уже квадратная от этого ....
Не получается настроить VPN в качестве клиента стандартный Windows клиент, к железке Zywall 35 ...
Обе стороны смотрят в интернет с реальными IP
IP Zywall: 212.34.22.147
IP Windows 7: 92.67.132.56
Настройки Zywall:
VPN - GATEWAY POLICY - EDIT
Property
Name: Secure_VPN
Gateway Policy Information
My Address: 212.34.22.147
Primary Remote Gateway: 92.67.132.56
Authentication Key
Pre-Shared Key: **********
Local ID Type: IP
Content: 212.34.22.147
Peer ID Type: IP
Content: 92.67.132.56
Extended Authentication
Enable Extended Authentication: on
Client mode: on
User Name: user
Password: ******
IKE Proposal
Negotiation Mode: Main
Encryption Algorithm: 3DES
Authentication Algorithm: MD5
SA Life Time (Seconds):28800
Key Group: DH2
Enable Multiple Proposals:on
VPN - NETWORK POLICY - EDIT
Property
Active: on
Allow NetBIOS broadcast Traffic Through IPSec Tunnel: on
Gateway Policy Information
Secure_VPN
Local Network
Address Type: Subnet
Starting IP Address: 192.168.0.0
Ending IP Address / Subnet Mask: 255.255.255.0
Local Port Start:0 End:0
Remote Network
Address Type: Single Adress
Starting IP Address: 92.67.132.56
IPSec Proposal
Encapsulation Mode: Tunel
Active Protocol: ESP
Encryption Algorithm: 3DES
Authentication Algorithm: MD5
SA Life Time (Seconds): 28800
Perfect Forward Secrecy (PFS): none
Enable Replay Detection: on
Enable Multiple Proposals: on
В Windows создал VPN подключение, забил логин, пароль PRE shared key ...
Перепробывал все алгоритмы в настройках IPSec (соответственно меняя и на Zyxel) итог одни
В логах железки:
vs. My Remote [92.67.132.56]-[92.67.132.56]
Recv ID: SINGLE, [92.67.132.56]-[92.67.132.56]
[ID] : Rule [VPN_ rule] Verifying Remote ID failed:
Если кто настраивал у себя, поделитесь конфигом .... голова уже квадратная от этого ....