sashadeg
05-04-2009, 17:48
Что нужно дополнить вот сюда?
$Input_1 = GUICtrlCreateInput("Введите любой текст", 20, 40, 185, 21)
#region: - Include
#include <GUIConstantsEx.au3>
#Include <GuiEdit.au3>
#include <WindowsConstants.au3>
#endregion
#region: - Option
Opt('GUIOnEventMode', 1)
Opt('MustDeclareVars', 1)
Opt('TrayIconDebug', 1)
Opt('TrayIconHide', 0)
#endregion
#region: - Global
Global $hWinMain, $Input_1, $Input_2
#endregion
#region: GUI
$hWinMain = GUICreate('Test', 400, 400, -1, -1)
GUISetOnEvent($GUI_EVENT_CLOSE, '_Exit_pro')
$Input_2 = GUICtrlCreateInput('Введите любой текст', 20, 70+40, 185, 21)
$Input_1 = GUICtrlCreateInput('Введите любой текст', 20, 40, 185, 21)
#endregion
#region: - После создания всех GUI
GUIRegisterMsg($WM_COMMAND, 'WM_COMMAND')
GUISetState(@SW_SHOW, $hWinMain)
#endregion
#region: - Sleep, Exit
While 1
Sleep(10)
WEnd
Func _Exit_pro()
Exit
EndFunc
#endregion
Func WM_COMMAND($hWnd, $iMsg, $iwParam, $ilParam)
#forceref $hWnd, $iMsg
Local $hWndFrom, $iIDFrom, $iCode, $hWndEdit
If Not IsHWnd($Input_1) Then $hWndEdit = GUICtrlGetHandle($Input_1)
$hWndFrom = $ilParam
$iIDFrom = _WinAPI_LoWord($iwParam)
$iCode = _WinAPI_HiWord($iwParam)
Switch $hWndFrom
Case $Input_1, $hWndEdit
Switch $iCode
Case $EN_ALIGN_LTR_EC ; Sent when the user has changed the edit control direction to left-to-right
_DebugPrint("$EN_ALIGN_LTR_EC" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; no return value
Case $EN_ALIGN_RTL_EC ; Sent when the user has changed the edit control direction to right-to-left
_DebugPrint("$EN_ALIGN_RTL_EC" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; no return value
Case $EN_CHANGE ; Sent when the user has taken an action that may have altered text in an edit control
_DebugPrint("$EN_CHANGE" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; no return value
Case $EN_ERRSPACE ; Sent when an edit control cannot allocate enough memory to meet a specific request
_DebugPrint("$EN_ERRSPACE" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; no return value
Case $EN_HSCROLL ; Sent when the user clicks an edit control's horizontal scroll bar
_DebugPrint("$EN_HSCROLL" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; no return value
Case $EN_KILLFOCUS ; Sent when an edit control loses the keyboard focus
_DebugPrint("$EN_KILLFOCUS" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; no return value
Case $EN_MAXTEXT ; Sent when the current text insertion has exceeded the specified number of characters for the edit control
_DebugPrint("$EN_MAXTEXT" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; This message is also sent when an edit control does not have the $ES_AUTOHSCROLL style and the number of characters to be
; inserted would exceed the width of the edit control.
; This message is also sent when an edit control does not have the $ES_AUTOVSCROLL style and the total number of lines resulting
; from a text insertion would exceed the height of the edit control
; no return value
Case $EN_SETFOCUS ; Sent when an edit control receives the keyboard focus
_DebugPrint("$EN_SETFOCUS" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
GUICtrlSetData($Input_1, '')
; no return value
Case $EN_UPDATE ; Sent when an edit control is about to redraw itself
_DebugPrint("$EN_UPDATE" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; no return value
Case $EN_VSCROLL ; Sent when the user clicks an edit control's vertical scroll bar or when the user scrolls the mouse wheel over the edit control
_DebugPrint("$EN_VSCROLL" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
; no return value
Case Else
_DebugPrint("Else" & @LF & "--> hWndFrom:" & @TAB & $hWndFrom & @LF & _
"-->IDFrom:" & @TAB & $iIDFrom & @LF & _
"-->Code:" & @TAB & $iCode)
EndSwitch
EndSwitch
Return $GUI_RUNDEFMSG
EndFunc ;==>WM_COMMAND
Func _DebugPrint($s_text, $line = @ScriptLineNumber)
ConsoleWrite( _
"!===========================================================" & @LF & _
"+======================================================" & @LF & _
"-->Line(" & StringFormat("%04d", $line) & "):" & @TAB & $s_text & @LF & _
"+======================================================" & @LF)
EndFunc ;==>_DebugPrint
Что нужно дополнить вот сюда? »
Просто дополнить, что то в эту строчку маловато будет, но вот так можно:#include <GUIConstantsEx.au3>
;ниже в переменных хранится текст, который будет в инпутах при запуске
$Tekst_v_inpute1="Введите текст в инпут1"
$Tekst_v_inpute2="Введите текст в инпут2"
$Tekst_v_inpute3="Введите текст в инпут3"
$GUI = GUICreate("AutoIt Example", 300, 160)
$Label=GUICtrlCreateLabel("Введите нужный текст во все поля:", 20, 10, 260, 20)
Controlfocus("AutoIt Example","",$Label) ;нужно только чтобы увести фокусировку от инпута 1, где фокус по умолчанию будет. Очень важно, если поменяеш название окна "AutoIt Example" на другое, то впиши то другое название и сюда.
$Input_1 = GUICtrlCreateInput($Tekst_v_inpute1, 20, 40, 260, 20)
$Input_2 = GUICtrlCreateInput($Tekst_v_inpute2, 20, 70, 260, 20)
$Input_3 = GUICtrlCreateInput($Tekst_v_inpute3, 20, 100, 260, 20)
$Ok_Button = GUICtrlCreateButton("OK", 40, 130, 60, 20)
$Cancel_Button = GUICtrlCreateButton("Отмена", 200, 130, 60, 20)
GUISetState(@SW_SHOW, $GUI)
$IsFocused_input1=0
$IsFocused_input2=0
$IsFocused_input3=0
While 1
Switch GUIGetMsg()
Case $GUI_EVENT_CLOSE
Exit ;тут выход вобще из скрыпта при закрытии Gui окна
Case $Cancel_Button
GUIDelete($GUI) ;удаляем gui, так как уже не надобно
MsgBox(0,"Внимание","Была нажата кнопка Отмена поэтому будет выход из цикла")
ExitLoop
Case $Ok_Button
$sText1 = GUICtrlRead($Input_1)
$sText2 = GUICtrlRead($Input_2)
$sText3 = GUICtrlRead($Input_3)
; Дальше идет проверка, не пустые ли инпуты, и изменен ли текст в инпутах из Начального положения, которое было в них при запуске.
If $sText1=="" Or $sText1==$Tekst_v_inpute1 Or $sText2=="" Or $sText2==$Tekst_v_inpute2 Or $sText3=="" Or $sText3==$Tekst_v_inpute3 then
MsgBox(0,'Внимание','Вы не ввели текст во всех полях')
else
GUIDelete($GUI) ;удаляем gui, так как уже не надобно
MsgBox(0,"Результат",$sText1 & @CRLF &$sText2 & @CRLF & $sText3) ;можно обойтись без этого сообщения, оно нужно лишь чтобы показать что в переменных $sText1, $sText2, $sText3 уже хранится текст введенный ранее в инпуты
Exitloop
endif
EndSwitch
_OrInput_IsFocused()
Wend
;дальше может быть любой набор команд...
Func _OrInput_IsFocused()
If _ControlIsFocused($GUI, $Input_1) And $IsFocused_input1=0 Then
$IsFocused_input1=1
GUICtrlSetData($Input_1,"") ;проверка, есть ли фокусировка на $Input_1, и если есть то очищаем инпут
ElseIf _ControlIsFocused($GUI, $Input_2) And $IsFocused_input2=0 Then
$IsFocused_input2=1
GUICtrlSetData($Input_2,"") ;проверка, есть ли фокусировка на $Input_2, и если есть то очищаем инпут
ElseIf _ControlIsFocused($GUI, $Input_3) And $IsFocused_input3=0 Then
$IsFocused_input3=1
GUICtrlSetData($Input_3,"") ;проверка, есть ли фокусировка на $Input_3, и если есть то очищаем инпут
EndIf
EndFunc ;_OrInput_IsFocused()
Func _ControlIsFocused($hWnd, $nCID)
Return ControlGetHandle($hWnd, '', $nCID) = ControlGetHandle($hWnd, '', ControlGetFocus($hWnd))
EndFunc
Если не понятно, зачем нужны функции _OrInput_IsFocused() и _ControlIsFocused() то просто не обращай на них внимания, главное понять суть...
vBulletin v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.