zonet
16-03-2009, 23:21
Здравствуйте.
Вот моя ситуация:
1) Решил восстановить файл msvcrt.dll (из-за неработающего Internet Explorer 7), нашел для этого способ:
To resolve this issue, use the Windows XP Recovery Console to replace the Msvcrt.dll file with the original version. To do this, follow these steps:
Insert your Windows XP CD-ROM into the computer's CD-ROM drive or DVD-ROM drive, and then restart your computer from the CD-ROM.
NOTE: Some computers may require that you modify the basic input/output system (BIOS) settings before you can start the computer from a CD-ROM. For information about how to modify BIOS, see your computer documentation.
At the Welcome to Setup screen, press R to start the Recovery Console.
Press the number key that corresponds to the installation that you want to repair, and then press ENTER.
Type the Administrator password, and then press ENTER.
With the Windows XP CD-ROM still in the CD-ROM drive or DVD-ROM drive, type the following commands, pressing ENTER after each command:
cd system32
ren msvcrt.dll msvcrt.old
CD-ROM_or_DVD-ROM_Drive_Letter:
cd \i386
expand msvcrt.dl_ BootDriveLetter:\windows\system32
exit
Источник http://support.microsoft.com/kb/324762
2) Вставил мультизагрузочный диск с WinXP SP2
3)Успел сделать это:
"cd system32
ren msvcrt.dll msvcrt.old
E:"
"cd \i386" - это уже не получилось ввести (писалось Неправильная команда или типа этого)
Поскольку не получилось дальше, просто ввел "exit"
и вышел
4) После этого синий экран с ошибкой STOP: c000021a...каракули...0xc0000135...каракули...Windows Logon Process...каракули...0x00000000 0x00000000 и т.д.
Я так понимаю, что по глупости все же переписал файл msvcrt.dll и поэтому XP не загружается ни в одном из режимов. (речь идет о вызываемых F8).
Что сделать, чтобы восстановить???
Пожалуйста, помогите...
-----------------------------------------
возможно я неправильно указал букву DVD привода? т.к. он у меня USB, а компьютер-ноутбук. Или не так указывал путь к папке i386?(из-за того, что диск мультизагрузочный)
С диска загружаться могу, могу включить версию XP PE с этого диска и наверно получу доступ ко всем файлам на ноутбуке:
1) Что мне там следует заменить, чтобы все заработало? (У меня отдельно в пакпе есть тот самый msvcrt.dll но не мой, а присланный мне другом. Можно ли его использовать, чтобы заменить свой?).
Вот моя ситуация:
1) Решил восстановить файл msvcrt.dll (из-за неработающего Internet Explorer 7), нашел для этого способ:
To resolve this issue, use the Windows XP Recovery Console to replace the Msvcrt.dll file with the original version. To do this, follow these steps:
Insert your Windows XP CD-ROM into the computer's CD-ROM drive or DVD-ROM drive, and then restart your computer from the CD-ROM.
NOTE: Some computers may require that you modify the basic input/output system (BIOS) settings before you can start the computer from a CD-ROM. For information about how to modify BIOS, see your computer documentation.
At the Welcome to Setup screen, press R to start the Recovery Console.
Press the number key that corresponds to the installation that you want to repair, and then press ENTER.
Type the Administrator password, and then press ENTER.
With the Windows XP CD-ROM still in the CD-ROM drive or DVD-ROM drive, type the following commands, pressing ENTER after each command:
cd system32
ren msvcrt.dll msvcrt.old
CD-ROM_or_DVD-ROM_Drive_Letter:
cd \i386
expand msvcrt.dl_ BootDriveLetter:\windows\system32
exit
Источник http://support.microsoft.com/kb/324762
2) Вставил мультизагрузочный диск с WinXP SP2
3)Успел сделать это:
"cd system32
ren msvcrt.dll msvcrt.old
E:"
"cd \i386" - это уже не получилось ввести (писалось Неправильная команда или типа этого)
Поскольку не получилось дальше, просто ввел "exit"
и вышел
4) После этого синий экран с ошибкой STOP: c000021a...каракули...0xc0000135...каракули...Windows Logon Process...каракули...0x00000000 0x00000000 и т.д.
Я так понимаю, что по глупости все же переписал файл msvcrt.dll и поэтому XP не загружается ни в одном из режимов. (речь идет о вызываемых F8).
Что сделать, чтобы восстановить???
Пожалуйста, помогите...
-----------------------------------------
возможно я неправильно указал букву DVD привода? т.к. он у меня USB, а компьютер-ноутбук. Или не так указывал путь к папке i386?(из-за того, что диск мультизагрузочный)
С диска загружаться могу, могу включить версию XP PE с этого диска и наверно получу доступ ко всем файлам на ноутбуке:
1) Что мне там следует заменить, чтобы все заработало? (У меня отдельно в пакпе есть тот самый msvcrt.dll но не мой, а присланный мне другом. Можно ли его использовать, чтобы заменить свой?).