user51
19-03-2008, 14:29
имею настроенный как прокси ALT линух установлен TightVNC
хочу использовать его без мышки клавы и монитора
после включения подсоединяюсь с помошью PUTTY.EXE
запускаю startx
шнур от монитора включен в комп (неважно включен монитор или нет)
получаю
X Protocol Version 11, Revision 0, Release 7.3
Build Operating System: Linux 2.6.18-std-smp-alt8 i686 ALT Linux
Current Operating System: Linux localhost.localdomain 2.6.18-std-smp-alt9 #1 SMP Mon Nov 26 00:52:45 MSK 2007 i686
Build Date: 26 November 2007
Before reporting problems, check https://bugzilla.altlinux.org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Wed Mar 19 10:38:59 2008
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module already built-in
(II) Module already built-in
(II) Module already built-in
(EE) [drm] Could not set DRM device bus ID.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
SetClientVersion: 0 9
SetKbdSettings - type: -1 rate: 30 delay: 500 snumlk: 0
The system is going down for system halt NOW!main (Wed Mar 19 10:40:31 2008):
и могу подсоединится TightVNC Viewer из винды и все ок
------------------------------
если шнур не был вставлен при включении или вынуть а потом запустить startx получаю
Current Operating System: Linux localhost.localdomain 2.6.18-std-smp-alt9 #1 SMP Mon Nov 26 00:52:45 MSK 2007 i686
Build Date: 26 November 2007
Before reporting problems, check https://bugzilla.altlinux.org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 19 09:23:40 2008
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module already built-in
(II) Module already built-in
(EE) intel(0): No valid modes.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
п²п╣ п╪п╬пЁя┐ п©п╬п╩я┐я┤п╦я┌я▄ я└п╟п╧п╩п╬п╡я▀п╧ пЄп╣я│п╨я─п╦п©я┌п╬я─, я│п╬п╬я┌п╡п╣я┌я│я┌п╡я┐я▌я┴п╦п╧ п╨п╬пҐя│п╬п╩п╦
[user@localhost ~]$
ну и подсоединистя конечно не получается
КАК ОБОЙТИ ОТСУТСВИЕ МОНИТОРА ?
хочу использовать его без мышки клавы и монитора
после включения подсоединяюсь с помошью PUTTY.EXE
запускаю startx
шнур от монитора включен в комп (неважно включен монитор или нет)
получаю
X Protocol Version 11, Revision 0, Release 7.3
Build Operating System: Linux 2.6.18-std-smp-alt8 i686 ALT Linux
Current Operating System: Linux localhost.localdomain 2.6.18-std-smp-alt9 #1 SMP Mon Nov 26 00:52:45 MSK 2007 i686
Build Date: 26 November 2007
Before reporting problems, check https://bugzilla.altlinux.org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Wed Mar 19 10:38:59 2008
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module already built-in
(II) Module already built-in
(II) Module already built-in
(EE) [drm] Could not set DRM device bus ID.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
SetClientVersion: 0 9
SetKbdSettings - type: -1 rate: 30 delay: 500 snumlk: 0
The system is going down for system halt NOW!main (Wed Mar 19 10:40:31 2008):
и могу подсоединится TightVNC Viewer из винды и все ок
------------------------------
если шнур не был вставлен при включении или вынуть а потом запустить startx получаю
Current Operating System: Linux localhost.localdomain 2.6.18-std-smp-alt9 #1 SMP Mon Nov 26 00:52:45 MSK 2007 i686
Build Date: 26 November 2007
Before reporting problems, check https://bugzilla.altlinux.org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 19 09:23:40 2008
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) Module already built-in
(II) Module already built-in
(EE) intel(0): No valid modes.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
п²п╣ п╪п╬пЁя┐ п©п╬п╩я┐я┤п╦я┌я▄ я└п╟п╧п╩п╬п╡я▀п╧ пЄп╣я│п╨я─п╦п©я┌п╬я─, я│п╬п╬я┌п╡п╣я┌я│я┌п╡я┐я▌я┴п╦п╧ п╨п╬пҐя│п╬п╩п╦
[user@localhost ~]$
ну и подсоединистя конечно не получается
КАК ОБОЙТИ ОТСУТСВИЕ МОНИТОРА ?